"DESC_WORK","ADVERSARIAL","DIAPHRAGM","LP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,DIAPHRAGM,LP,1,Purging of downstream pipework.
"DESC_WORK","ADVERSARIAL","DIAPHRAGM","MP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,DIAPHRAGM,MP,1,Purging of downstream pipework.
"DESC_WORK","ADVERSARIAL","ROTARY","LP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,ROTARY,LP,1,Purging of downstream pipework.
"DESC_WORK","ADVERSARIAL","ROTARY","MP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,ROTARY,MP,1,Purging of downstream pipework.
"DESC_WORK","ADVERSARIAL","TURBINE","LP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,TURBINE,LP,1,Purging of downstream pipework.
"DESC_WORK","ADVERSARIAL","TURBINE","MP",1,"Purging of downstream pipework."
DESC_WORK,ADVERSARIAL,TURBINE,MP,1,Purging of downstream pipework.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",11,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,11,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","EXCHANGE","ROTARY","LP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,ROTARY,LP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","EXCHANGE","ROTARY","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,ROTARY,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","EXCHANGE","TURBINE","LP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,TURBINE,LP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","EXCHANGE","TURBINE","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,EXCHANGE,TURBINE,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",11,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,11,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","ROTARY","LP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,ROTARY,LP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","ROTARY","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,ROTARY,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","TURBINE","LP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,TURBINE,LP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","STD EXCHANGE","TURBINE","MP",12,"Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others."
TERM_COND,STD EXCHANGE,TURBINE,MP,12,Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
"TERM_COND","ADDON","DIAPHRAGM","LP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,DIAPHRAGM,LP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","DIAPHRAGM","LP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,DIAPHRAGM,LP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","DIAPHRAGM","LP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,DIAPHRAGM,LP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADDON","DIAPHRAGM","MP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,DIAPHRAGM,MP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","DIAPHRAGM","MP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,DIAPHRAGM,MP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","DIAPHRAGM","MP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,DIAPHRAGM,MP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADDON","ROTARY","LP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,ROTARY,LP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","ROTARY","LP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,ROTARY,LP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","ROTARY","LP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,ROTARY,LP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADDON","ROTARY","MP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,ROTARY,MP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","ROTARY","MP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,ROTARY,MP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","ROTARY","MP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,ROTARY,MP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADDON","TURBINE","LP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,TURBINE,LP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","TURBINE","LP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,TURBINE,LP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","TURBINE","LP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,TURBINE,LP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADDON","TURBINE","MP",1,"This quotation is based on there being a working LF connection on the existing meter."
TERM_COND,ADDON,TURBINE,MP,1,This quotation is based on there being a working LF connection on the existing meter.
"TERM_COND","ADDON","TURBINE","MP",2,"This quotation does not include for the provision of a separate instrumentation cabinet."
TERM_COND,ADDON,TURBINE,MP,2,This quotation does not include for the provision of a separate instrumentation cabinet.
"TERM_COND","ADDON","TURBINE","MP",3,"Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you."
TERM_COND,ADDON,TURBINE,MP,3,Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
"TERM_COND","ADVERSARIAL","DIAPHRAGM","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,ADVERSARIAL,DIAPHRAGM,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","ADVERSARIAL","DIAPHRAGM","LP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,ADVERSARIAL,DIAPHRAGM,LP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","ADVERSARIAL","ROTARY","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,ADVERSARIAL,ROTARY,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","ADVERSARIAL","ROTARY","LP",2,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,ADVERSARIAL,ROTARY,LP,2,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","ADVERSARIAL","ROTARY","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,ADVERSARIAL,ROTARY,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","ADVERSARIAL","ROTARY","MP",1,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,ADVERSARIAL,ROTARY,MP,1,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","ADVERSARIAL","ROTARY","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,ADVERSARIAL,ROTARY,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","ADVERSARIAL","TURBINE","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence. "
TERM_COND,ADVERSARIAL,TURBINE,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","ADVERSARIAL","TURBINE","LP",2,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,ADVERSARIAL,TURBINE,LP,2,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","ADVERSARIAL","TURBINE","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,ADVERSARIAL,TURBINE,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","ADVERSARIAL","TURBINE","MP",1,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,ADVERSARIAL,TURBINE,MP,1,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","ADVERSARIAL","TURBINE","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,ADVERSARIAL,TURBINE,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,DIAPHRAGM,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",9,"This quotation is based on two visits, one to remove the exisiting meter, and one to install the new meter."
TERM_COND,EXCHANGE,DIAPHRAGM,LP,9,This quotation is based on two visits, one to remove the exisiting meter, and one to install the new meter.
"TERM_COND","EXCHANGE","DIAPHRAGM","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,DIAPHRAGM,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,DIAPHRAGM,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,DIAPHRAGM,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","DIAPHRAGM","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,EXCHANGE,DIAPHRAGM,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","EXCHANGE","ROTARY","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,ROTARY,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","ROTARY","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,EXCHANGE,ROTARY,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","EXCHANGE","ROTARY","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,ROTARY,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","ROTARY","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,ROTARY,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","ROTARY","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,ROTARY,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","ROTARY","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,ROTARY,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","ROTARY","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,ROTARY,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","ROTARY","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,ROTARY,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","ROTARY","LP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,EXCHANGE,ROTARY,LP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","EXCHANGE","ROTARY","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,ROTARY,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","ROTARY","LP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,EXCHANGE,ROTARY,LP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","EXCHANGE","ROTARY","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,ROTARY,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","ROTARY","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,EXCHANGE,ROTARY,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","EXCHANGE","ROTARY","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,ROTARY,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","ROTARY","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,ROTARY,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","ROTARY","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,ROTARY,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","ROTARY","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,ROTARY,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","ROTARY","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,ROTARY,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","ROTARY","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,ROTARY,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","ROTARY","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,EXCHANGE,ROTARY,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","EXCHANGE","ROTARY","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,ROTARY,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","ROTARY","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,EXCHANGE,ROTARY,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","EXCHANGE","TURBINE","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,TURBINE,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","TURBINE","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.."
TERM_COND,EXCHANGE,TURBINE,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed..
"TERM_COND","EXCHANGE","TURBINE","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,TURBINE,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","TURBINE","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,TURBINE,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","TURBINE","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,TURBINE,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","TURBINE","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,TURBINE,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","TURBINE","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,TURBINE,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","TURBINE","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,TURBINE,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","TURBINE","LP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,EXCHANGE,TURBINE,LP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","EXCHANGE","TURBINE","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,TURBINE,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","TURBINE","LP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,EXCHANGE,TURBINE,LP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","EXCHANGE","TURBINE","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,EXCHANGE,TURBINE,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","EXCHANGE","TURBINE","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,EXCHANGE,TURBINE,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","EXCHANGE","TURBINE","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,EXCHANGE,TURBINE,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","EXCHANGE","TURBINE","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,EXCHANGE,TURBINE,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","EXCHANGE","TURBINE","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,EXCHANGE,TURBINE,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","EXCHANGE","TURBINE","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,EXCHANGE,TURBINE,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","EXCHANGE","TURBINE","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,EXCHANGE,TURBINE,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","EXCHANGE","TURBINE","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,EXCHANGE,TURBINE,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","EXCHANGE","TURBINE","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,EXCHANGE,TURBINE,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","EXCHANGE","TURBINE","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,EXCHANGE,TURBINE,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","EXCHANGE","TURBINE","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,EXCHANGE,TURBINE,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","INSTALL","DIAPHRAGM","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,DIAPHRAGM,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","DIAPHRAGM","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,DIAPHRAGM,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","DIAPHRAGM","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,DIAPHRAGM,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","DIAPHRAGM","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,DIAPHRAGM,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","DIAPHRAGM","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,DIAPHRAGM,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","DIAPHRAGM","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,DIAPHRAGM,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","DIAPHRAGM","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,DIAPHRAGM,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","DIAPHRAGM","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,DIAPHRAGM,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","DIAPHRAGM","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,DIAPHRAGM,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","DIAPHRAGM","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,DIAPHRAGM,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","DIAPHRAGM","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,DIAPHRAGM,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","DIAPHRAGM","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,DIAPHRAGM,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","DIAPHRAGM","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,DIAPHRAGM,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","DIAPHRAGM","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,DIAPHRAGM,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","DIAPHRAGM","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,DIAPHRAGM,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","DIAPHRAGM","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,DIAPHRAGM,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","DIAPHRAGM","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,DIAPHRAGM,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","DIAPHRAGM","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,DIAPHRAGM,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","DIAPHRAGM","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,INSTALL,DIAPHRAGM,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","INSTALL","ROTARY","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,ROTARY,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","ROTARY","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,ROTARY,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","ROTARY","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,ROTARY,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","ROTARY","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,ROTARY,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","ROTARY","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,ROTARY,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","ROTARY","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,ROTARY,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","ROTARY","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,ROTARY,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","ROTARY","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,ROTARY,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","ROTARY","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,ROTARY,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","ROTARY","LP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,INSTALL,ROTARY,LP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","INSTALL","ROTARY","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,ROTARY,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","ROTARY","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,ROTARY,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","ROTARY","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,ROTARY,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","ROTARY","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,ROTARY,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","ROTARY","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,ROTARY,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","ROTARY","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,ROTARY,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","ROTARY","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,ROTARY,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","ROTARY","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,ROTARY,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","ROTARY","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,ROTARY,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","ROTARY","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,INSTALL,ROTARY,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","INSTALL","TURBINE","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,TURBINE,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","TURBINE","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,TURBINE,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","TURBINE","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,TURBINE,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","TURBINE","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,TURBINE,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","TURBINE","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,TURBINE,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","TURBINE","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,TURBINE,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","TURBINE","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,TURBINE,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","TURBINE","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,TURBINE,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","TURBINE","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,TURBINE,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","TURBINE","LP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,INSTALL,TURBINE,LP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","INSTALL","TURBINE","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,INSTALL,TURBINE,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","INSTALL","TURBINE","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,INSTALL,TURBINE,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","INSTALL","TURBINE","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,INSTALL,TURBINE,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","INSTALL","TURBINE","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,INSTALL,TURBINE,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","INSTALL","TURBINE","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,INSTALL,TURBINE,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","INSTALL","TURBINE","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,INSTALL,TURBINE,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","INSTALL","TURBINE","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,INSTALL,TURBINE,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","INSTALL","TURBINE","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,INSTALL,TURBINE,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","INSTALL","TURBINE","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,INSTALL,TURBINE,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","INSTALL","TURBINE","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,INSTALL,TURBINE,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","OFMAT","DIAPHRAGM","LP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,DIAPHRAGM,LP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","DIAPHRAGM","LP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,DIAPHRAGM,LP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","OFMAT","DIAPHRAGM","MP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,DIAPHRAGM,MP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","DIAPHRAGM","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,DIAPHRAGM,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","OFMAT","ROTARY","LP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,ROTARY,LP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","ROTARY","LP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,ROTARY,LP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","OFMAT","ROTARY","MP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,ROTARY,MP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","ROTARY","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,ROTARY,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","OFMAT","TURBINE","LP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,TURBINE,LP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","TURBINE","LP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,TURBINE,LP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","OFMAT","TURBINE","MP",1,"This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly."
TERM_COND,OFMAT,TURBINE,MP,1,This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
"TERM_COND","OFMAT","TURBINE","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,OFMAT,TURBINE,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","DIAPHRAGM","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,REMOVE,DIAPHRAGM,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","REMOVE","DIAPHRAGM","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,DIAPHRAGM,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","DIAPHRAGM","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,DIAPHRAGM,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","DIAPHRAGM","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,DIAPHRAGM,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","DIAPHRAGM","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,DIAPHRAGM,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","DIAPHRAGM","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,REMOVE,DIAPHRAGM,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","REMOVE","ROTARY","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,REMOVE,ROTARY,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","REMOVE","ROTARY","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,ROTARY,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","ROTARY","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,ROTARY,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","ROTARY","LP",4,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,REMOVE,ROTARY,LP,4,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","REMOVE","ROTARY","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,ROTARY,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","ROTARY","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,ROTARY,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","ROTARY","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,REMOVE,ROTARY,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","REMOVE","TURBINE","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,REMOVE,TURBINE,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","REMOVE","TURBINE","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,TURBINE,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","TURBINE","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,TURBINE,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","TURBINE","LP",4,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,REMOVE,TURBINE,LP,4,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","REMOVE","TURBINE","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,REMOVE,TURBINE,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","REMOVE","TURBINE","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,REMOVE,TURBINE,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","REMOVE","TURBINE","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,REMOVE,TURBINE,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,DIAPHRAGM,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","DIAPHRAGM","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD EXCHANGE,DIAPHRAGM,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD EXCHANGE","ROTARY","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,ROTARY,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","ROTARY","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,ROTARY,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","ROTARY","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,ROTARY,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","ROTARY","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,ROTARY,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","ROTARY","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,ROTARY,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","ROTARY","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,ROTARY,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","ROTARY","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,ROTARY,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","ROTARY","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,ROTARY,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","ROTARY","LP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,ROTARY,LP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","ROTARY","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,ROTARY,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","ROTARY","LP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD EXCHANGE,ROTARY,LP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD EXCHANGE","ROTARY","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,ROTARY,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","ROTARY","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,ROTARY,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","ROTARY","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,ROTARY,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","ROTARY","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,ROTARY,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","ROTARY","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,ROTARY,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","ROTARY","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,ROTARY,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","ROTARY","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,ROTARY,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","ROTARY","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,ROTARY,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","ROTARY","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,ROTARY,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","ROTARY","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,ROTARY,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","ROTARY","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD EXCHANGE,ROTARY,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD EXCHANGE","TURBINE","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,TURBINE,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","TURBINE","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,TURBINE,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","TURBINE","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,TURBINE,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","TURBINE","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,TURBINE,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","TURBINE","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,TURBINE,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","TURBINE","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,TURBINE,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","TURBINE","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,TURBINE,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","TURBINE","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,TURBINE,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","TURBINE","LP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,TURBINE,LP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","TURBINE","LP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,TURBINE,LP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","TURBINE","LP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD EXCHANGE,TURBINE,LP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD EXCHANGE","TURBINE","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD EXCHANGE,TURBINE,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD EXCHANGE","TURBINE","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD EXCHANGE,TURBINE,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD EXCHANGE","TURBINE","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD EXCHANGE,TURBINE,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD EXCHANGE","TURBINE","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD EXCHANGE,TURBINE,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD EXCHANGE","TURBINE","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD EXCHANGE,TURBINE,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD EXCHANGE","TURBINE","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD EXCHANGE,TURBINE,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD EXCHANGE","TURBINE","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD EXCHANGE,TURBINE,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD EXCHANGE","TURBINE","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD EXCHANGE,TURBINE,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD EXCHANGE","TURBINE","MP",9,"This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV."
TERM_COND,STD EXCHANGE,TURBINE,MP,9,This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
"TERM_COND","STD EXCHANGE","TURBINE","MP",10,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD EXCHANGE,TURBINE,MP,10,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD EXCHANGE","TURBINE","MP",11,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD EXCHANGE,TURBINE,MP,11,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,DIAPHRAGM,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,DIAPHRAGM,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","DIAPHRAGM","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,DIAPHRAGM,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,DIAPHRAGM,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,DIAPHRAGM,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","DIAPHRAGM","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD INSTALL,DIAPHRAGM,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD INSTALL","ROTARY","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,ROTARY,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","ROTARY","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,ROTARY,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","ROTARY","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,ROTARY,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","ROTARY","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,ROTARY,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","ROTARY","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,ROTARY,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","ROTARY","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,ROTARY,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","ROTARY","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,ROTARY,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","ROTARY","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,ROTARY,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","ROTARY","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,ROTARY,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","ROTARY","LP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD INSTALL,ROTARY,LP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD INSTALL","ROTARY","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,ROTARY,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","ROTARY","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,ROTARY,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","ROTARY","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,ROTARY,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","ROTARY","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,ROTARY,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","ROTARY","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,ROTARY,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","ROTARY","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,ROTARY,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","ROTARY","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,ROTARY,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","ROTARY","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,ROTARY,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","ROTARY","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,ROTARY,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","ROTARY","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD INSTALL,ROTARY,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD INSTALL","TURBINE","LP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,TURBINE,LP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","TURBINE","LP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,TURBINE,LP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","TURBINE","LP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,TURBINE,LP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","TURBINE","LP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,TURBINE,LP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","TURBINE","LP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,TURBINE,LP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","TURBINE","LP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,TURBINE,LP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","TURBINE","LP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,TURBINE,LP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","TURBINE","LP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,TURBINE,LP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","TURBINE","LP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,TURBINE,LP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","TURBINE","LP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD INSTALL,TURBINE,LP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD INSTALL","TURBINE","MP",1,"Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order."
TERM_COND,STD INSTALL,TURBINE,MP,1,Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
"TERM_COND","STD INSTALL","TURBINE","MP",2,"Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed."
TERM_COND,STD INSTALL,TURBINE,MP,2,Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
"TERM_COND","STD INSTALL","TURBINE","MP",3,"Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed."
TERM_COND,STD INSTALL,TURBINE,MP,3,Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
"TERM_COND","STD INSTALL","TURBINE","MP",4,"The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point."
TERM_COND,STD INSTALL,TURBINE,MP,4,The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
"TERM_COND","STD INSTALL","TURBINE","MP",5,"This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided."
TERM_COND,STD INSTALL,TURBINE,MP,5,This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
"TERM_COND","STD INSTALL","TURBINE","MP",6,"The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily"
TERM_COND,STD INSTALL,TURBINE,MP,6,The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
"TERM_COND","STD INSTALL","TURBINE","MP",7,"It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place."
TERM_COND,STD INSTALL,TURBINE,MP,7,It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
"TERM_COND","STD INSTALL","TURBINE","MP",8,"The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2."
TERM_COND,STD INSTALL,TURBINE,MP,8,The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
"TERM_COND","STD INSTALL","TURBINE","MP",9,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD INSTALL,TURBINE,MP,9,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD INSTALL","TURBINE","MP",10,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD INSTALL,TURBINE,MP,10,Lifting gear if required will be charged at a rate of <20>400 per day.
"CONT_SUM","STD REMOVE","DIAPHRAGM","MP",1,"plus purging on time and materials basis."
CONT_SUM,STD REMOVE,DIAPHRAGM,MP,1,plus purging on time and materials basis.
"TERM_COND","STD REMOVE","DIAPHRAGM","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,STD REMOVE,DIAPHRAGM,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","STD REMOVE","DIAPHRAGM","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,DIAPHRAGM,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","DIAPHRAGM","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,DIAPHRAGM,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","DIAPHRAGM","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,DIAPHRAGM,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","DIAPHRAGM","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,DIAPHRAGM,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","DIAPHRAGM","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD REMOVE,DIAPHRAGM,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD REMOVE","ROTARY","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,STD REMOVE,ROTARY,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","STD REMOVE","ROTARY","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,ROTARY,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","ROTARY","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,ROTARY,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","ROTARY","LP",4,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD REMOVE,ROTARY,LP,4,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD REMOVE","ROTARY","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,ROTARY,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","ROTARY","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,ROTARY,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","ROTARY","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD REMOVE,ROTARY,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD REMOVE","TURBINE","LP",1,"This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence."
TERM_COND,STD REMOVE,TURBINE,LP,1,This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
"TERM_COND","STD REMOVE","TURBINE","LP",2,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,TURBINE,LP,2,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","TURBINE","LP",3,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,TURBINE,LP,3,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","TURBINE","LP",4,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD REMOVE,TURBINE,LP,4,Lifting gear if required will be charged at a rate of <20>400 per day.
"TERM_COND","STD REMOVE","TURBINE","MP",1,"Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging."
TERM_COND,STD REMOVE,TURBINE,MP,1,Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
"TERM_COND","STD REMOVE","TURBINE","MP",2,"This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted"
TERM_COND,STD REMOVE,TURBINE,MP,2,This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
"TERM_COND","STD REMOVE","TURBINE","MP",3,"Lifting gear if required will be charged at a rate of <20>400 per day."
TERM_COND,STD REMOVE,TURBINE,MP,3,Lifting gear if required will be charged at a rate of <20>400 per day.
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
74
TERM_COND
EXCHANGE
DIAPHRAGM
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
75
TERM_COND
EXCHANGE
ROTARY
LP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
76
TERM_COND
EXCHANGE
ROTARY
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
77
TERM_COND
EXCHANGE
TURBINE
LP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
78
TERM_COND
EXCHANGE
TURBINE
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
79
DESC_WORK
REMOVE
ROTARY
LP
2
excluding lifting gear charges
80
DESC_WORK
REMOVE
ROTARY
MP
2
excluding lifting gear charges
81
DESC_WORK
REMOVE
TURBINE
LP
2
excluding lifting gear charges
82
DESC_WORK
REMOVE
TURBINE
MP
2
excluding lifting gear charges
83
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
11
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
84
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
85
TERM_COND
STD EXCHANGE
ROTARY
LP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
86
TERM_COND
STD EXCHANGE
ROTARY
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
87
TERM_COND
STD EXCHANGE
TURBINE
LP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
88
TERM_COND
STD EXCHANGE
TURBINE
MP
12
Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
89
TERM_COND
ADDON
DIAPHRAGM
LP
1
This quotation is based on there being a working LF connection on the existing meter.
90
TERM_COND
ADDON
DIAPHRAGM
LP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
91
TERM_COND
ADDON
DIAPHRAGM
LP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
92
TERM_COND
ADDON
DIAPHRAGM
MP
1
This quotation is based on there being a working LF connection on the existing meter.
93
TERM_COND
ADDON
DIAPHRAGM
MP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
94
TERM_COND
ADDON
DIAPHRAGM
MP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
95
TERM_COND
ADDON
ROTARY
LP
1
This quotation is based on there being a working LF connection on the existing meter.
96
TERM_COND
ADDON
ROTARY
LP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
97
TERM_COND
ADDON
ROTARY
LP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
98
TERM_COND
ADDON
ROTARY
MP
1
This quotation is based on there being a working LF connection on the existing meter.
99
TERM_COND
ADDON
ROTARY
MP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
100
TERM_COND
ADDON
ROTARY
MP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
101
TERM_COND
ADDON
TURBINE
LP
1
This quotation is based on there being a working LF connection on the existing meter.
102
TERM_COND
ADDON
TURBINE
LP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
103
TERM_COND
ADDON
TURBINE
LP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
104
TERM_COND
ADDON
TURBINE
MP
1
This quotation is based on there being a working LF connection on the existing meter.
105
TERM_COND
ADDON
TURBINE
MP
2
This quotation does not include for the provision of a separate instrumentation cabinet.
106
TERM_COND
ADDON
TURBINE
MP
3
Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
107
TERM_COND
ADVERSARIAL
DIAPHRAGM
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
108
TERM_COND
ADVERSARIAL
DIAPHRAGM
LP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
109
TERM_COND
ADVERSARIAL
ROTARY
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
110
TERM_COND
ADVERSARIAL
ROTARY
LP
2
Lifting gear if required will be charged at a rate of 400 per day.
111
TERM_COND
ADVERSARIAL
ROTARY
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
112
TERM_COND
ADVERSARIAL
ROTARY
MP
1
Lifting gear if required will be charged at a rate of 400 per day.
113
TERM_COND
ADVERSARIAL
ROTARY
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
114
TERM_COND
ADVERSARIAL
TURBINE
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence. This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
115
TERM_COND
ADVERSARIAL
TURBINE
LP
2
Lifting gear if required will be charged at a rate of 400 per day.
116
TERM_COND
ADVERSARIAL
TURBINE
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
117
TERM_COND
ADVERSARIAL
TURBINE
MP
1
Lifting gear if required will be charged at a rate of 400 per day.
118
TERM_COND
ADVERSARIAL
TURBINE
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
119
TERM_COND
EXCHANGE
DIAPHRAGM
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
120
TERM_COND
EXCHANGE
DIAPHRAGM
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
121
TERM_COND
EXCHANGE
DIAPHRAGM
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
122
TERM_COND
EXCHANGE
DIAPHRAGM
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
123
TERM_COND
EXCHANGE
DIAPHRAGM
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
124
TERM_COND
EXCHANGE
DIAPHRAGM
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
125
TERM_COND
EXCHANGE
DIAPHRAGM
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
126
TERM_COND
EXCHANGE
DIAPHRAGM
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
127
TERM_COND
EXCHANGE
DIAPHRAGM
LP
9
This quotation is based on two visits, one to remove the exisiting meter, and one to install the new meter.This quotation is based on two visits
128
TERM_COND
EXCHANGE
DIAPHRAGM
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
129
TERM_COND
EXCHANGE
DIAPHRAGM
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
130
TERM_COND
EXCHANGE
DIAPHRAGM
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
131
TERM_COND
EXCHANGE
DIAPHRAGM
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
132
TERM_COND
EXCHANGE
DIAPHRAGM
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
133
TERM_COND
EXCHANGE
DIAPHRAGM
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
134
TERM_COND
EXCHANGE
DIAPHRAGM
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
135
TERM_COND
EXCHANGE
DIAPHRAGM
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
136
TERM_COND
EXCHANGE
DIAPHRAGM
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
137
TERM_COND
EXCHANGE
DIAPHRAGM
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
138
TERM_COND
EXCHANGE
DIAPHRAGM
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
139
TERM_COND
EXCHANGE
DIAPHRAGM
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
140
TERM_COND
EXCHANGE
ROTARY
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
141
TERM_COND
EXCHANGE
ROTARY
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
142
TERM_COND
EXCHANGE
ROTARY
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
143
TERM_COND
EXCHANGE
ROTARY
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
144
TERM_COND
EXCHANGE
ROTARY
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
145
TERM_COND
EXCHANGE
ROTARY
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
146
TERM_COND
EXCHANGE
ROTARY
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
147
TERM_COND
EXCHANGE
ROTARY
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
148
TERM_COND
EXCHANGE
ROTARY
LP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
149
TERM_COND
EXCHANGE
ROTARY
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
150
TERM_COND
EXCHANGE
ROTARY
LP
11
Lifting gear if required will be charged at a rate of 400 per day.
151
TERM_COND
EXCHANGE
ROTARY
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
152
TERM_COND
EXCHANGE
ROTARY
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
153
TERM_COND
EXCHANGE
ROTARY
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
154
TERM_COND
EXCHANGE
ROTARY
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
155
TERM_COND
EXCHANGE
ROTARY
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
156
TERM_COND
EXCHANGE
ROTARY
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
157
TERM_COND
EXCHANGE
ROTARY
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
158
TERM_COND
EXCHANGE
ROTARY
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
159
TERM_COND
EXCHANGE
ROTARY
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
160
TERM_COND
EXCHANGE
ROTARY
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
161
TERM_COND
EXCHANGE
ROTARY
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
162
TERM_COND
EXCHANGE
TURBINE
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
163
TERM_COND
EXCHANGE
TURBINE
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed..
164
TERM_COND
EXCHANGE
TURBINE
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
165
TERM_COND
EXCHANGE
TURBINE
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
166
TERM_COND
EXCHANGE
TURBINE
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
167
TERM_COND
EXCHANGE
TURBINE
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
168
TERM_COND
EXCHANGE
TURBINE
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
169
TERM_COND
EXCHANGE
TURBINE
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
170
TERM_COND
EXCHANGE
TURBINE
LP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
171
TERM_COND
EXCHANGE
TURBINE
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
172
TERM_COND
EXCHANGE
TURBINE
LP
11
Lifting gear if required will be charged at a rate of 400 per day.
173
TERM_COND
EXCHANGE
TURBINE
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
174
TERM_COND
EXCHANGE
TURBINE
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
175
TERM_COND
EXCHANGE
TURBINE
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
176
TERM_COND
EXCHANGE
TURBINE
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
177
TERM_COND
EXCHANGE
TURBINE
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
178
TERM_COND
EXCHANGE
TURBINE
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
179
TERM_COND
EXCHANGE
TURBINE
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
180
TERM_COND
EXCHANGE
TURBINE
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
181
TERM_COND
EXCHANGE
TURBINE
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
182
TERM_COND
EXCHANGE
TURBINE
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
183
TERM_COND
EXCHANGE
TURBINE
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
184
TERM_COND
INSTALL
DIAPHRAGM
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
185
TERM_COND
INSTALL
DIAPHRAGM
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
186
TERM_COND
INSTALL
DIAPHRAGM
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
187
TERM_COND
INSTALL
DIAPHRAGM
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
188
TERM_COND
INSTALL
DIAPHRAGM
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
189
TERM_COND
INSTALL
DIAPHRAGM
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
190
TERM_COND
INSTALL
DIAPHRAGM
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
191
TERM_COND
INSTALL
DIAPHRAGM
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
192
TERM_COND
INSTALL
DIAPHRAGM
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
193
TERM_COND
INSTALL
DIAPHRAGM
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
194
TERM_COND
INSTALL
DIAPHRAGM
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
195
TERM_COND
INSTALL
DIAPHRAGM
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
196
TERM_COND
INSTALL
DIAPHRAGM
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
197
TERM_COND
INSTALL
DIAPHRAGM
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
198
TERM_COND
INSTALL
DIAPHRAGM
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
199
TERM_COND
INSTALL
DIAPHRAGM
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
200
TERM_COND
INSTALL
DIAPHRAGM
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
201
TERM_COND
INSTALL
DIAPHRAGM
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
202
TERM_COND
INSTALL
DIAPHRAGM
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
203
TERM_COND
INSTALL
ROTARY
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
204
TERM_COND
INSTALL
ROTARY
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
205
TERM_COND
INSTALL
ROTARY
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
206
TERM_COND
INSTALL
ROTARY
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
207
TERM_COND
INSTALL
ROTARY
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
208
TERM_COND
INSTALL
ROTARY
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
209
TERM_COND
INSTALL
ROTARY
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
210
TERM_COND
INSTALL
ROTARY
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
211
TERM_COND
INSTALL
ROTARY
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
212
TERM_COND
INSTALL
ROTARY
LP
10
Lifting gear if required will be charged at a rate of 400 per day.
213
TERM_COND
INSTALL
ROTARY
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
214
TERM_COND
INSTALL
ROTARY
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
215
TERM_COND
INSTALL
ROTARY
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
216
TERM_COND
INSTALL
ROTARY
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
217
TERM_COND
INSTALL
ROTARY
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
218
TERM_COND
INSTALL
ROTARY
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
219
TERM_COND
INSTALL
ROTARY
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
220
TERM_COND
INSTALL
ROTARY
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
221
TERM_COND
INSTALL
ROTARY
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
222
TERM_COND
INSTALL
ROTARY
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
223
TERM_COND
INSTALL
TURBINE
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
224
TERM_COND
INSTALL
TURBINE
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
225
TERM_COND
INSTALL
TURBINE
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
226
TERM_COND
INSTALL
TURBINE
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
227
TERM_COND
INSTALL
TURBINE
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
228
TERM_COND
INSTALL
TURBINE
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
229
TERM_COND
INSTALL
TURBINE
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
230
TERM_COND
INSTALL
TURBINE
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
231
TERM_COND
INSTALL
TURBINE
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
232
TERM_COND
INSTALL
TURBINE
LP
10
Lifting gear if required will be charged at a rate of 400 per day.
233
TERM_COND
INSTALL
TURBINE
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
234
TERM_COND
INSTALL
TURBINE
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
235
TERM_COND
INSTALL
TURBINE
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
236
TERM_COND
INSTALL
TURBINE
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
237
TERM_COND
INSTALL
TURBINE
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
238
TERM_COND
INSTALL
TURBINE
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
239
TERM_COND
INSTALL
TURBINE
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
240
TERM_COND
INSTALL
TURBINE
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
241
TERM_COND
INSTALL
TURBINE
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
242
TERM_COND
INSTALL
TURBINE
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
243
TERM_COND
OFMAT
DIAPHRAGM
LP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
244
TERM_COND
OFMAT
DIAPHRAGM
LP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
245
TERM_COND
OFMAT
DIAPHRAGM
MP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
246
TERM_COND
OFMAT
DIAPHRAGM
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
247
TERM_COND
OFMAT
ROTARY
LP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
248
TERM_COND
OFMAT
ROTARY
LP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
249
TERM_COND
OFMAT
ROTARY
MP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
250
TERM_COND
OFMAT
ROTARY
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
251
TERM_COND
OFMAT
TURBINE
LP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
252
TERM_COND
OFMAT
TURBINE
LP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
253
TERM_COND
OFMAT
TURBINE
MP
1
This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
254
TERM_COND
OFMAT
TURBINE
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
255
TERM_COND
REMOVE
DIAPHRAGM
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
256
TERM_COND
REMOVE
DIAPHRAGM
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
257
TERM_COND
REMOVE
DIAPHRAGM
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
258
TERM_COND
REMOVE
DIAPHRAGM
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
259
TERM_COND
REMOVE
DIAPHRAGM
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
260
TERM_COND
REMOVE
DIAPHRAGM
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
261
TERM_COND
REMOVE
ROTARY
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
262
TERM_COND
REMOVE
ROTARY
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
263
TERM_COND
REMOVE
ROTARY
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
264
TERM_COND
REMOVE
ROTARY
LP
4
Lifting gear if required will be charged at a rate of 400 per day.
265
TERM_COND
REMOVE
ROTARY
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
266
TERM_COND
REMOVE
ROTARY
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
267
TERM_COND
REMOVE
ROTARY
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
268
TERM_COND
REMOVE
TURBINE
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
269
TERM_COND
REMOVE
TURBINE
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
270
TERM_COND
REMOVE
TURBINE
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
271
TERM_COND
REMOVE
TURBINE
LP
4
Lifting gear if required will be charged at a rate of 400 per day.
272
TERM_COND
REMOVE
TURBINE
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
273
TERM_COND
REMOVE
TURBINE
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
274
TERM_COND
REMOVE
TURBINE
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
275
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
276
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
277
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
278
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
279
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
280
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
281
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
282
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
283
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
284
TERM_COND
STD EXCHANGE
DIAPHRAGM
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
285
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
286
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
287
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
288
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
289
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
290
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
291
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
292
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
293
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
294
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
295
TERM_COND
STD EXCHANGE
DIAPHRAGM
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
296
TERM_COND
STD EXCHANGE
ROTARY
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
297
TERM_COND
STD EXCHANGE
ROTARY
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
298
TERM_COND
STD EXCHANGE
ROTARY
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
299
TERM_COND
STD EXCHANGE
ROTARY
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
300
TERM_COND
STD EXCHANGE
ROTARY
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
301
TERM_COND
STD EXCHANGE
ROTARY
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
302
TERM_COND
STD EXCHANGE
ROTARY
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
303
TERM_COND
STD EXCHANGE
ROTARY
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
304
TERM_COND
STD EXCHANGE
ROTARY
LP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
305
TERM_COND
STD EXCHANGE
ROTARY
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
306
TERM_COND
STD EXCHANGE
ROTARY
LP
11
Lifting gear if required will be charged at a rate of 400 per day.
307
TERM_COND
STD EXCHANGE
ROTARY
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
308
TERM_COND
STD EXCHANGE
ROTARY
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
309
TERM_COND
STD EXCHANGE
ROTARY
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
310
TERM_COND
STD EXCHANGE
ROTARY
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
311
TERM_COND
STD EXCHANGE
ROTARY
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
312
TERM_COND
STD EXCHANGE
ROTARY
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
313
TERM_COND
STD EXCHANGE
ROTARY
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
314
TERM_COND
STD EXCHANGE
ROTARY
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
315
TERM_COND
STD EXCHANGE
ROTARY
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
316
TERM_COND
STD EXCHANGE
ROTARY
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
317
TERM_COND
STD EXCHANGE
ROTARY
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
318
TERM_COND
STD EXCHANGE
TURBINE
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
319
TERM_COND
STD EXCHANGE
TURBINE
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
320
TERM_COND
STD EXCHANGE
TURBINE
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
321
TERM_COND
STD EXCHANGE
TURBINE
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
322
TERM_COND
STD EXCHANGE
TURBINE
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
323
TERM_COND
STD EXCHANGE
TURBINE
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
324
TERM_COND
STD EXCHANGE
TURBINE
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
325
TERM_COND
STD EXCHANGE
TURBINE
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
326
TERM_COND
STD EXCHANGE
TURBINE
LP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
327
TERM_COND
STD EXCHANGE
TURBINE
LP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
328
TERM_COND
STD EXCHANGE
TURBINE
LP
11
Lifting gear if required will be charged at a rate of 400 per day.
329
TERM_COND
STD EXCHANGE
TURBINE
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
330
TERM_COND
STD EXCHANGE
TURBINE
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
331
TERM_COND
STD EXCHANGE
TURBINE
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
332
TERM_COND
STD EXCHANGE
TURBINE
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
333
TERM_COND
STD EXCHANGE
TURBINE
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
334
TERM_COND
STD EXCHANGE
TURBINE
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
335
TERM_COND
STD EXCHANGE
TURBINE
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
336
TERM_COND
STD EXCHANGE
TURBINE
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
337
TERM_COND
STD EXCHANGE
TURBINE
MP
9
This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
338
TERM_COND
STD EXCHANGE
TURBINE
MP
10
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
339
TERM_COND
STD EXCHANGE
TURBINE
MP
11
Lifting gear if required will be charged at a rate of 400 per day.
340
TERM_COND
STD INSTALL
DIAPHRAGM
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
341
TERM_COND
STD INSTALL
DIAPHRAGM
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
342
TERM_COND
STD INSTALL
DIAPHRAGM
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
343
TERM_COND
STD INSTALL
DIAPHRAGM
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
344
TERM_COND
STD INSTALL
DIAPHRAGM
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
345
TERM_COND
STD INSTALL
DIAPHRAGM
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
346
TERM_COND
STD INSTALL
DIAPHRAGM
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
347
TERM_COND
STD INSTALL
DIAPHRAGM
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
348
TERM_COND
STD INSTALL
DIAPHRAGM
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
349
TERM_COND
STD INSTALL
DIAPHRAGM
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
350
TERM_COND
STD INSTALL
DIAPHRAGM
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
351
TERM_COND
STD INSTALL
DIAPHRAGM
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
352
TERM_COND
STD INSTALL
DIAPHRAGM
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
353
TERM_COND
STD INSTALL
DIAPHRAGM
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
354
TERM_COND
STD INSTALL
DIAPHRAGM
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
355
TERM_COND
STD INSTALL
DIAPHRAGM
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
356
TERM_COND
STD INSTALL
DIAPHRAGM
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
357
TERM_COND
STD INSTALL
DIAPHRAGM
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
358
TERM_COND
STD INSTALL
DIAPHRAGM
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
359
TERM_COND
STD INSTALL
ROTARY
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
360
TERM_COND
STD INSTALL
ROTARY
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
361
TERM_COND
STD INSTALL
ROTARY
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
362
TERM_COND
STD INSTALL
ROTARY
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
363
TERM_COND
STD INSTALL
ROTARY
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
364
TERM_COND
STD INSTALL
ROTARY
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
365
TERM_COND
STD INSTALL
ROTARY
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
366
TERM_COND
STD INSTALL
ROTARY
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
367
TERM_COND
STD INSTALL
ROTARY
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
368
TERM_COND
STD INSTALL
ROTARY
LP
10
Lifting gear if required will be charged at a rate of 400 per day.
369
TERM_COND
STD INSTALL
ROTARY
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
370
TERM_COND
STD INSTALL
ROTARY
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
371
TERM_COND
STD INSTALL
ROTARY
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
372
TERM_COND
STD INSTALL
ROTARY
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
373
TERM_COND
STD INSTALL
ROTARY
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
374
TERM_COND
STD INSTALL
ROTARY
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
375
TERM_COND
STD INSTALL
ROTARY
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
376
TERM_COND
STD INSTALL
ROTARY
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
377
TERM_COND
STD INSTALL
ROTARY
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
378
TERM_COND
STD INSTALL
ROTARY
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
379
TERM_COND
STD INSTALL
TURBINE
LP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
380
TERM_COND
STD INSTALL
TURBINE
LP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
381
TERM_COND
STD INSTALL
TURBINE
LP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
382
TERM_COND
STD INSTALL
TURBINE
LP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
383
TERM_COND
STD INSTALL
TURBINE
LP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
384
TERM_COND
STD INSTALL
TURBINE
LP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
385
TERM_COND
STD INSTALL
TURBINE
LP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
386
TERM_COND
STD INSTALL
TURBINE
LP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
387
TERM_COND
STD INSTALL
TURBINE
LP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
388
TERM_COND
STD INSTALL
TURBINE
LP
10
Lifting gear if required will be charged at a rate of 400 per day.
389
TERM_COND
STD INSTALL
TURBINE
MP
1
Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
390
TERM_COND
STD INSTALL
TURBINE
MP
2
Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
391
TERM_COND
STD INSTALL
TURBINE
MP
3
Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
392
TERM_COND
STD INSTALL
TURBINE
MP
4
The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
393
TERM_COND
STD INSTALL
TURBINE
MP
5
This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
394
TERM_COND
STD INSTALL
TURBINE
MP
6
The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
395
TERM_COND
STD INSTALL
TURBINE
MP
7
It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
396
TERM_COND
STD INSTALL
TURBINE
MP
8
The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
397
TERM_COND
STD INSTALL
TURBINE
MP
9
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
398
TERM_COND
STD INSTALL
TURBINE
MP
10
Lifting gear if required will be charged at a rate of 400 per day.
399
CONT_SUM
STD REMOVE
DIAPHRAGM
MP
1
plus purging on time and materials basis.
400
CONT_SUM
STD REMOVE
DIAPHRAGM
MP
2
excluding lifting gear charges
401
CONT_SUM_QA
STD REMOVE
DIAPHRAGM
MP
2
excluding lifting gear charges
402
DESC_WORK
STD REMOVE
ROTARY
LP
2
excluding lifting gear charges
403
DESC_WORK
STD REMOVE
ROTARY
MP
2
excluding lifting gear charges
404
DESC_WORK
STD REMOVE
TURBINE
LP
2
excluding lifting gear charges
405
DESC_WORK
STD REMOVE
TURBINE
MP
2
excluding lifting gear charges
406
TERM_COND
STD REMOVE
DIAPHRAGM
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
407
TERM_COND
STD REMOVE
DIAPHRAGM
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
408
TERM_COND
STD REMOVE
DIAPHRAGM
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
409
TERM_COND
STD REMOVE
DIAPHRAGM
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
410
TERM_COND
STD REMOVE
DIAPHRAGM
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
411
TERM_COND
STD REMOVE
DIAPHRAGM
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
412
TERM_COND
STD REMOVE
ROTARY
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
413
TERM_COND
STD REMOVE
ROTARY
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
414
TERM_COND
STD REMOVE
ROTARY
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
415
TERM_COND
STD REMOVE
ROTARY
LP
4
Lifting gear if required will be charged at a rate of 400 per day.
416
TERM_COND
STD REMOVE
ROTARY
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
417
TERM_COND
STD REMOVE
ROTARY
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
418
TERM_COND
STD REMOVE
ROTARY
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
419
TERM_COND
STD REMOVE
TURBINE
LP
1
This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure
420
TERM_COND
STD REMOVE
TURBINE
LP
2
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
421
TERM_COND
STD REMOVE
TURBINE
LP
3
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
422
TERM_COND
STD REMOVE
TURBINE
LP
4
Lifting gear if required will be charged at a rate of 400 per day.
423
TERM_COND
STD REMOVE
TURBINE
MP
1
Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work
424
TERM_COND
STD REMOVE
TURBINE
MP
2
This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
425
TERM_COND
STD REMOVE
TURBINE
MP
3
Lifting gear if required will be charged at a rate of 400 per day.
354.63,,,31/10/2011,,"HOCO",,"Gas Cab No 2 (Multi)",,,,,
360.78,,,01/04/2012,,HOCO,,Gas Cab No 2 (Multi),,,,,
456.21,,,31/10/2011,,"HOCO",,"Gas Cab No 4",,,,,
465.18,,,01/04/2012,,HOCO,,Gas Cab No 4,,,,,
1000.76,,,31/10/2011,,"HOCO",,"Gas Cab No 6",,,,,
1007.36,,,01/04/2012,,HOCO,,Gas Cab No 6,,,,,
3914.26,,,31/10/2011,,"HOCO",,"Custom1",,,,,
3858.69,,,01/04/2012,,HOCO,,Custom1,,,,,
4313.29,,,31/10/2011,,"HOCO",,"Custom2",,,,,
4245.89,,,01/04/2012,,HOCO,,Custom2,,,,,
4481.63,,,31/10/2011,,"HOCO",,"Custom3",,,,,
4409.24,,,01/04/2012,,HOCO,,Custom3,,,,,
4156.17,,,31/10/2011,,"HOCO",,"Custom4",,,,,
4093.43,,,01/04/2012,,HOCO,,Custom4,,,,,
4552.71,,,31/10/2011,,"HOCO",,"Custom5",,,,,
4478.21,,,01/04/2012,,HOCO,,Custom5,,,,,
5389.43,,,31/10/2011,,"HOCO",,"Custom6",,,,,
5290.12,,,01/04/2012,,HOCO,,Custom6,,,,,
3547.65,,,31/10/2011,,"HOCO",,"KP1",,,,,
3502.95,,,01/04/2012,,HOCO,,KP1,,,,,
3783.33,,,31/10/2011,,"HOCO",,"KP2",,,,,
3731.64,,,01/04/2012,,HOCO,,KP2,,,,,
4068.89,,,31/10/2011,,"HOCO",,"KP3",,,,,
4008.73,,,01/04/2012,,HOCO,,KP3,,,,,
4779.66,,,31/10/2011,,"HOCO",,"KP4",,,,,
4698.43,,,01/04/2012,,HOCO,,KP4,,,,,
4911.84,,,31/10/2011,,"HOCO",,"KP5",,,,,
4826.69,,,01/04/2012,,HOCO,,KP5,,,,,
294.13,,,31/10/2011,,"HOCO",,"Gas Cab No 2BB",,,,,
294.96,,,01/04/2012,,HOCO,,Gas Cab No 2BB,,,,,
389.63,,,31/10/2011,,"HOCO",,"Gas Cab No 4BB25",,,,,
375.99,,,01/04/2012,,HOCO,,Gas Cab No 4BB25,,,,,
456.21,,,31/10/2011,,"HOCO",,"Gas Cab No 4BB40",,,,,
439.37,,,01/04/2012,,HOCO,,Gas Cab No 4BB40,,,,,
1009.56,,,31/10/2011,,"HOCO",,"Gas Cab No 6BB100",,,,,
985.27,,,01/04/2012,,HOCO,,Gas Cab No 6BB100,,,,,
1229.42,,,31/10/2011,,"HOCO",,"Gas Cab No 6BB160",,,,,
1124.22,,,01/04/2012,,HOCO,,Gas Cab No 6BB160,,,,,
294.13,,,31/10/2011,,"HOCO",,"GC2FSBB",,,,,
294.96,,,01/04/2012,,HOCO,,GC2FSBB,,,,,
389.63,,,31/10/2011,,"HOCO",,"GC3BB",,,,,
375.99,,,01/04/2012,,HOCO,,GC3BB,,,,,
389.63,,,31/10/2011,,"HOCO",,"GC4BB25",,,,,
375.99,,,01/04/2012,,HOCO,,GC4BB25,,,,,
456.21,,,31/10/2011,,"HOCO",,"GC4BB40",,,,,
439.37,,,01/04/2012,,HOCO,,GC4BB40,,,,,
839.88,,,31/10/2011,,"HOCO",,"GC5BB",,,,,
791.94,,,01/04/2012,,HOCO,,GC5BB,,,,,
1009.56,,,31/10/2011,,"HOCO",,"GC6BB100",,,,,
985.27,,,01/04/2012,,HOCO,,GC6BB100,,,,,
1229.42,,,31/10/2011,,"HOCO",,"GC6BB160",,,,,
1124.22,,,01/04/2012,,HOCO,,GC6BB160,,,,,
294.13,,,31/10/2011,,"HOCO",,"GC2BB",,,,,
294.96,,,01/04/2012,,HOCO,,GC2BB,,,,,
354.63,,,31/10/2011,,"HOCO",,"Gas Cab No 2MP",,,,,
360.78,,,01/04/2012,,HOCO,,Gas Cab No 2MP,,,,,
5689.96,,,31/10/2011,,"HOCO",,"Custom7",,,,,
5581.73,,,01/04/2012,,HOCO,,Custom7,,,,,
,,,,,AICO,,,,PURGING,Diaphragm,,ADVERSARIAL
,,,,,AICO,,,,PURGING,Diaphragm,,
,,,,,AICO,,,,PURGING,Diaphragm,,STD REMOVE
1
2
SELLING_PRICE
COST_PRICE
DELIVERY_COST
VALID_FROM
VALID_TO
COST_TYPE
MODU_CODE
HOU_CODE
BAS_CODE
ADIT_CODE
METY_CODE
MESC_CODE
ENTY_CODE
3
0.00
0.00
31/10/201101/04/2012
MOCO
AD016S
4
0.00
0.00
31/10/201101/04/2012
MOCO
AD016SW
5
0.00
0.00
31/10/201101/04/2012
MOCO
AD025S
6
0.00
0.00
31/10/201101/04/2012
MOCO
AD025SW
7
0.00
0.00
31/10/201101/04/2012
MOCO
AD040S
8
0.00
0.00
31/10/201101/04/2012
MOCO
AD065S
9
0.00
0.00
31/10/201101/04/2012
MOCO
AD100S
10
0.00
0.00
31/10/201101/04/2012
MOCO
AD160S
11
295.90377.91
27.50
31/10/201101/04/2012
MOCO
ARCMVV0025A
12
295.90377.91
27.50
31/10/201101/04/2012
MOCO
ARCMVV0025AW
13
375.05459.23
27.50
31/10/201101/04/2012
MOCO
ARCMVV0040AW
14
375.05459.23
27.50
31/10/201101/04/2012
MOCO
ARCMVV0040A
15
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMHH0065A
16
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMVV0065A
17
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMVH0065A
18
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMHV0065A
19
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMHH0100A
20
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMVV0100A
21
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMVH0100A
22
876.141144.25
60.50
31/10/201101/04/2012
MOCO
ARCMHV0100A
23
1095.661412.97
60.50
31/10/201101/04/2012
MOCO
ARCMVV0160A
24
1095.661412.97
60.50
31/10/201101/04/2012
MOCO
ARCMHH0160A
25
1095.661412.97
60.50
31/10/201101/04/2012
MOCO
ARCMVH0160A
26
1095.661412.97
60.50
31/10/201101/04/2012
MOCO
ARCMHV0160A
27
1127.891446.08
60.50
31/10/201101/04/2012
MOCO
ARCMVV0200A
28
1127.891446.08
60.50
31/10/201101/04/2012
MOCO
ARCMHH0200A
29
1127.891446.08
60.50
31/10/201101/04/2012
MOCO
ARCMVH0200A
30
1127.891446.08
60.50
31/10/201101/04/2012
MOCO
ARCMHV0200A
31
1144.721463.39
60.50
31/10/201101/04/2012
MOCO
ARCMVV0250A
32
1144.721463.39
60.50
31/10/201101/04/2012
MOCO
ARCMHH0250A
33
1144.721463.39
60.50
31/10/201101/04/2012
MOCO
ARCMVH0250A
34
1144.721463.39
60.50
31/10/201101/04/2012
MOCO
ARCMHV0250A
35
2260.792617.55
60.50
31/10/201101/04/2012
MOCO
ARVV0250AP
36
2260.792617.55
60.50
31/10/201101/04/2012
MOCO
ARHH0250AP
37
2260.792617.55
60.50
31/10/201101/04/2012
MOCO
ARVH0250AP
38
2260.792617.55
60.50
31/10/201101/04/2012
MOCO
ARHV0250AP
39
1482.331843.34
60.50
31/10/201101/04/2012
MOCO
ARVV0300A
40
1482.331843.34
60.50
31/10/201101/04/2012
MOCO
ARHH0300A
41
1482.331843.34
60.50
31/10/201101/04/2012
MOCO
ARVH0300A
42
1482.331843.34
60.50
31/10/201101/04/2012
MOCO
ARHV0300A
43
3163.693584.81
99.00
31/10/201101/04/2012
MOCO
ARVV0300AP
44
3163.693584.81
99.00
31/10/201101/04/2012
MOCO
ARHH0300AP
45
3163.693584.81
99.00
31/10/201101/04/2012
MOCO
ARVH0300AP
46
3163.693584.81
99.00
31/10/201101/04/2012
MOCO
ARHV0300AP
47
1926.082313.14
60.50
31/10/201101/04/2012
MOCO
ARVV0400A
48
1926.082313.14
60.50
31/10/201101/04/2012
MOCO
ARHH0400A
49
1926.082313.14
60.50
31/10/201101/04/2012
MOCO
ARVH0400A
50
1926.082313.14
60.50
31/10/201101/04/2012
MOCO
ARHV0400A
51
2483.562899.79
99.00
31/10/201101/04/2012
MOCO
ARVV0650A
52
2483.562899.79
99.00
31/10/201101/04/2012
MOCO
ARHH0650A
53
2483.562899.79
99.00
31/10/201101/04/2012
MOCO
ARVH0650A
54
2483.562899.79
99.00
31/10/201101/04/2012
MOCO
ARHV0650A
55
5221.165861.72
550.00
31/10/201101/04/2012
MOCO
ARVV0650AP
56
5221.165861.72
550.00
31/10/201101/04/2012
MOCO
ARHH0650AP
57
5221.165861.72
550.00
31/10/201101/04/2012
MOCO
ARVH0650AP
58
5221.165861.72
550.00
31/10/201101/04/2012
MOCO
ARHV0650AP
59
2565.672984.16
99.00
31/10/201101/04/2012
MOCO
ARVV1000A
60
2565.672984.16
99.00
31/10/201101/04/2012
MOCO
ARHH1000A
61
2565.672984.16
99.00
31/10/201101/04/2012
MOCO
ARVH1000A
62
2565.672984.16
99.00
31/10/201101/04/2012
MOCO
ARHV1000A
63
5860.866519.03
550.00
31/10/201101/04/2012
MOCO
ARVV1000AP
64
5860.866519.03
550.00
31/10/201101/04/2012
MOCO
ARHH1000AP
65
5860.866519.03
550.00
31/10/201101/04/2012
MOCO
ARVH1000AP
66
5860.866519.03
550.00
31/10/201101/04/2012
MOCO
ARHV1000AP
67
295.60314.14
92.40
31/10/201101/04/2012
MOCO
ASD016A
68
295.60314.14
92.40
31/10/201101/04/2012
MOCO
ASD016AW
69
386.84437.34
92.40
31/10/201101/04/2012
MOCO
ASD025A
70
641.42595.21
92.40
31/10/201101/04/2012
MOCO
ASD040A
71
995.571126.44
92.40
31/10/201101/04/2012
MOCO
ASD065A
72
1135.082517.10
92.40
31/10/201101/04/2012
MOCO
ASD100A
73
2044.262271.58
92.40
31/10/201101/04/2012
MOCO
ASD160A
74
630.59677.13
92.40
31/10/201101/04/2012
MOCO
ASR0025A
75
686.24733.74
92.40
31/10/201101/04/2012
MOCO
ASR0040A
76
2468.212603.78
92.40
31/10/201101/04/2012
MOCO
ASR0100A
77
2800.632988.50
92.40
31/10/201101/04/2012
MOCO
ASR0160A
78
3158.853356.58
92.40
31/10/201101/04/2012
MOCO
ASR0200A
79
3041.904714.75
92.40
31/10/201101/04/2012
MOCO
ASR0250A
80
3302.165453.07
92.40
31/10/201101/04/2012
MOCO
ASR0300A
81
3667.755453.07
92.40
31/10/201101/04/2012
MOCO
ASR0400A
82
3902.516445.43
550.00
31/10/201101/04/2012
MOCO
ASR0650A
83
4569.868088.34
550.00
31/10/201101/04/2012
MOCO
ASR1000A
84
1204.501765.50
77.00
31/10/201101/04/2012
MOCO
ASR0025D
85
1204.501765.50
77.00
31/10/201101/04/2012
MOCO
ASR0040D
86
1380.501765.50
77.00
31/10/201101/04/2012
MOCO
ASR0065D
87
1595.001765.50
77.00
31/10/201101/04/2012
MOCO
ASR0100D
88
2387.003586.00
77.00
31/10/201101/04/2012
MOCO
ASR0160D
89
3663.004757.50
99.00
31/10/201101/04/2012
MOCO
ASR0250D
90
3771.904845.50
99.00
31/10/201101/04/2012
MOCO
ASR0310D
91
6092.904845.50
165.00
31/10/201101/04/2012
MOCO
ASR0450D
92
6092.905857.50
165.00
31/10/201101/04/2012
MOCO
ASR0450DP
93
6938.807045.50
209.00
31/10/201101/04/2012
MOCO
ASR0650D
94
7616.408541.50
209.00
31/10/201101/04/2012
MOCO
ASR1075D
95
8800.0010461.00
275.00
31/10/201101/04/2012
MOCO
ASR1600D
96
12380.5014074.50
495.00
31/10/201101/04/2012
MOCO
ASR2885D
97
444.65481.05
31/10/201101/04/2012
AICO
EMS
98
400.00
31/10/201101/04/2012
AICO
LIFTING GEAR
99
997.58968.00
31/10/201101/04/2012
BACO
RA0025LPB
100
997.58968.00
31/10/201101/04/2012
BACO
RA0025MPB
101
997.58968.00
31/10/201101/04/2012
BACO
RA0040LPB
102
997.58968.00
31/10/201101/04/2012
BACO
RA0040MPB
103
1621.071573.00
31/10/201101/04/2012
BACO
RA0065LPB
104
1621.071573.00
31/10/201101/04/2012
BACO
RA0100LPB
105
997.58968.00
31/10/201101/04/2012
BACO
RA0100MPB
106
1621.071573.00
31/10/201101/04/2012
BACO
RA0160LPB
107
997.58968.00
31/10/201101/04/2012
BACO
RA0160MPB
108
1621.071573.00
31/10/201101/04/2012
BACO
RA0200LPB
109
997.58968.00
31/10/201101/04/2012
BACO
RA0200MPB
110
1621.071573.00
31/10/201101/04/2012
BACO
RA0250+LPB
111
1621.071573.00
31/10/201101/04/2012
BACO
RA0250LPB
112
1621.071573.00
31/10/201101/04/2012
BACO
RA0250MPB
113
1932.811875.50
31/10/201101/04/2012
BACO
RA0300+LPB
114
1621.071573.00
31/10/201101/04/2012
BACO
RA0300LPB
115
1621.071573.00
31/10/201101/04/2012
BACO
RA0300MPB
116
1932.811875.50
31/10/201101/04/2012
BACO
RA0400LPB
117
1621.071573.00
31/10/201101/04/2012
BACO
RA0400MPB
118
2119.862057.00
31/10/201101/04/2012
BACO
RA0650+LPB
119
1932.811875.50
31/10/201101/04/2012
BACO
RA0650LPB
120
1932.811875.50
31/10/201101/04/2012
BACO
RA0650MPB
121
2119.862057.00
31/10/201101/04/2012
BACO
RA1000+LPB
122
1932.811875.50
31/10/201101/04/2012
BACO
RA1000LPB
123
1932.811875.50
31/10/201101/04/2012
BACO
RA1000MPB
124
997.58968.00
31/10/201101/04/2012
BACO
RD0025MPB
125
997.58968.00
31/10/201101/04/2012
BACO
RD0040MPB
126
997.58968.00
31/10/201101/04/2012
BACO
RD0065MPB
127
997.58968.00
31/10/201101/04/2012
BACO
RD0100MPB
128
1621.071573.00
31/10/201101/04/2012
BACO
RD0160MPB
129
1621.071573.00
31/10/201101/04/2012
BACO
RD0250MPB
130
1621.071573.00
31/10/201101/04/2012
BACO
RD0310MPB
131
1621.071573.00
31/10/201101/04/2012
BACO
RD0450+MPB
132
1621.071573.00
31/10/201101/04/2012
BACO
RD0450MPB
133
1932.811875.50
31/10/201101/04/2012
BACO
RD0650MPB
134
1932.811875.50
31/10/201101/04/2012
BACO
RD1075MPB
135
1932.811875.50
31/10/201101/04/2012
BACO
RD1600MPB
136
2431.602359.50
31/10/201101/04/2012
BACO
RD2885MPB
137
997.58968.00
31/10/201101/04/2012
BACO
U016LPB
138
997.58968.00
31/10/201101/04/2012
BACO
U016MPB
139
997.58968.00
31/10/201101/04/2012
BACO
U025LPB
140
997.58968.00
31/10/201101/04/2012
BACO
U025MPB
141
997.58968.00
31/10/201101/04/2012
BACO
U040LPB
142
997.58968.00
31/10/201101/04/2012
BACO
U040MPB
143
997.58968.00
31/10/201101/04/2012
BACO
U065LPB
144
1621.071573.00
31/10/201101/04/2012
BACO
U065MPB
145
1621.071573.00
31/10/201101/04/2012
BACO
U100LPB
146
1621.071573.00
31/10/201101/04/2012
BACO
U100MPB
147
1621.071573.00
31/10/201101/04/2012
BACO
U160LPB
148
1621.071573.00
31/10/201101/04/2012
BACO
U160MPB
149
294.13294.96
31/10/201101/04/2012
HOCO
GC2
150
294.13294.96
31/10/201101/04/2012
HOCO
GC2FS
151
354.63360.78
31/10/201101/04/2012
HOCO
GC2MP
152
389.63375.99
31/10/201101/04/2012
HOCO
GC3
153
456.21465.18
31/10/201101/04/2012
HOCO
GC4
154
742.21751.18
31/10/201101/04/2012
HOCO
GC4+
155
839.88791.94
31/10/201101/04/2012
HOCO
GC5
156
1009.561016.16
31/10/201101/04/2012
HOCO
GC6LP
157
1009.561016.16
31/10/201101/04/2012
HOCO
GC6MP
158
1122.281133.09
31/10/201101/04/2012
HOCO
GC7LP
159
1122.281133.09
31/10/201101/04/2012
HOCO
GC7MP
160
1246.981258.99
31/10/201101/04/2012
HOCO
GC7+LP
161
1246.981258.99
31/10/201101/04/2012
HOCO
GC7+MP
162
2724.642704.35
31/10/201101/04/2012
HOCO
GC8LP/MP
163
354.63360.78
31/10/201101/04/2012
HOCO
Gas Cab No 2 (Multi)
164
456.21465.18
31/10/201101/04/2012
HOCO
Gas Cab No 4
165
1000.761007.36
31/10/201101/04/2012
HOCO
Gas Cab No 6
166
3914.263858.69
31/10/201101/04/2012
HOCO
Custom1
167
4313.294245.89
31/10/201101/04/2012
HOCO
Custom2
168
4481.634409.24
31/10/201101/04/2012
HOCO
Custom3
169
4156.174093.43
31/10/201101/04/2012
HOCO
Custom4
170
4552.714478.21
31/10/201101/04/2012
HOCO
Custom5
171
5389.435290.12
31/10/201101/04/2012
HOCO
Custom6
172
3547.653502.95
31/10/201101/04/2012
HOCO
KP1
173
3783.333731.64
31/10/201101/04/2012
HOCO
KP2
174
4068.894008.73
31/10/201101/04/2012
HOCO
KP3
175
4779.664698.43
31/10/201101/04/2012
HOCO
KP4
176
4911.844826.69
31/10/201101/04/2012
HOCO
KP5
177
294.13294.96
31/10/201101/04/2012
HOCO
Gas Cab No 2BB
178
389.63375.99
31/10/201101/04/2012
HOCO
Gas Cab No 4BB25
179
456.21439.37
31/10/201101/04/2012
HOCO
Gas Cab No 4BB40
180
1009.56985.27
31/10/201101/04/2012
HOCO
Gas Cab No 6BB100
181
1229.421124.22
31/10/201101/04/2012
HOCO
Gas Cab No 6BB160
182
294.13294.96
31/10/201101/04/2012
HOCO
GC2FSBB
183
389.63375.99
31/10/201101/04/2012
HOCO
GC3BB
184
389.63375.99
31/10/201101/04/2012
HOCO
GC4BB25
185
456.21439.37
31/10/201101/04/2012
HOCO
GC4BB40
186
839.88791.94
31/10/201101/04/2012
HOCO
GC5BB
187
1009.56985.27
31/10/201101/04/2012
HOCO
GC6BB100
188
1229.421124.22
31/10/201101/04/2012
HOCO
GC6BB160
189
294.13294.96
31/10/201101/04/2012
HOCO
GC2BB
190
354.63360.78
31/10/201101/04/2012
HOCO
Gas Cab No 2MP
191
5689.965581.73
31/10/201101/04/2012
HOCO
Custom7
192
AICO
PURGING
Diaphragm
ADVERSARIAL
193
AICO
PURGING
Diaphragm
194
AICO
PURGING
Diaphragm
STD REMOVE
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
andrew.gilmore