ca7c636d19
git-svn-id: http://locode01.ad.dom/svn/WEBMIP/trunk@16908 248e525c-4dfb-0310-94bc-949c084e9493
435 lines
134 KiB
SQL
435 lines
134 KiB
SQL
REM INSERTING into CAVEAT_TEXTS
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,151);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,152);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,153);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,154);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,155);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,156);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,157);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,158);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,159);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,160);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,161);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed..',null,162);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,163);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,164);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,165);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,166);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,167);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,168);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,169);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,170);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,171);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,172);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,173);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,174);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,175);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,176);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,177);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,178);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,179);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,180);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,181);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,182);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,183);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,184);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,185);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,186);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,187);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,188);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,189);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,190);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,191);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,192);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,193);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,194);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,195);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,196);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,197);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,198);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,199);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,200);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,201);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,202);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,203);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,204);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,205);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,206);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,207);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,208);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,209);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,210);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,211);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,212);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,213);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,214);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,215);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,216);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,217);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,218);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,219);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,220);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','LP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,1);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','MP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,2);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','MP','CONT_SUM',null,2,'excluding lifting gear charges',null,3);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,4);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','CONT_SUM',null,2,'excluding lifting gear charges',null,5);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,6);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','CONT_SUM',null,2,'excluding lifting gear charges',null,7);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,8);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','CONT_SUM',null,2,'excluding lifting gear charges',null,9);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,10);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','CONT_SUM',null,2,'excluding lifting gear charges',null,11);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,12);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,13);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,14);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,15);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,16);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,17);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,18);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,19);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,20);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,21);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,22);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','CONT_SUM',null,2,'excluding lifting gear charges',null,23);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,24);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,25);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,26);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,27);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,28);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,29);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,30);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,31);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','CONT_SUM',null,1,'excluding lifting gear charges',null,32);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','CONT_SUM',null,1,'excluding lifting gear charges',null,33);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','LP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,34);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','MP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,35);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','MP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,36);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,37);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,38);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,39);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,40);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,41);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,42);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','CONT_SUM_QA',null,1,'plus purging on time and materials basis.',null,43);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,44);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,45);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,46);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,47);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,48);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,49);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','DIAPHRAGM','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,50);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,51);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,52);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,53);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,54);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,55);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,56);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,57);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,58);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,59);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,60);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,61);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,62);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,63);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,64);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,65);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','LP','DESC_WORK',null,1,'Purging of downstream pipework.',null,66);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','MP','DESC_WORK',null,1,'Purging of downstream pipework.',null,67);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','DESC_WORK',null,1,'Purging of downstream pipework.',null,68);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','DESC_WORK',null,1,'Purging of downstream pipework.',null,69);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','DESC_WORK',null,1,'Purging of downstream pipework.',null,70);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','DESC_WORK',null,1,'Purging of downstream pipework.',null,71);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,11,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,72);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,73);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,74);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,75);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','LP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,76);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','TURBINE','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,77);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','DESC_WORK',null,2,'excluding lifting gear charges',null,78);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','MP','DESC_WORK',null,2,'excluding lifting gear charges',null,79);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','DESC_WORK',null,2,'excluding lifting gear charges',null,80);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','MP','DESC_WORK',null,2,'excluding lifting gear charges',null,81);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,11,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,82);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,83);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,84);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,85);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,86);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,12,'Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.',null,87);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','LP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,88);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','LP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,89);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','LP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,90);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','MP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,91);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','MP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,92);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','DIAPHRAGM','MP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,93);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','LP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,94);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','LP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,95);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','LP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,96);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','MP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,97);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','MP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,98);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','ROTARY','MP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,99);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','LP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,100);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','LP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,101);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','LP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,102);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','MP','TERM_COND',null,1,'This quotation is based on there being a working LF connection on the existing meter.',null,103);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','MP','TERM_COND',null,2,'This quotation does not include for the provision of a separate instrumentation cabinet.',null,104);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADDON','TURBINE','MP','TERM_COND',null,3,'Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.',null,105);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,106);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','DIAPHRAGM','LP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,107);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,108);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','TERM_COND',null,2,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,109);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,110);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','TERM_COND',null,1,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,111);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','ROTARY','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,112);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,113);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','TERM_COND',null,2,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,114);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,115);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','TERM_COND',null,1,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,116);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('ADVERSARIAL','TURBINE','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,117);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,118);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,119);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,120);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,121);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,122);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,123);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,124);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,125);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,9,'This quotation is based on two visits, one to remove the exisiting meter, and one to install the new meter.',null,126);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,127);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,128);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,129);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,130);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,131);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,132);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,133);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,134);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,135);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,136);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,137);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,138);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,139);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,140);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,141);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,142);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,143);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,144);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,145);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,146);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,147);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,148);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','LP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,149);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('EXCHANGE','ROTARY','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,150);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,326);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,327);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,328);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,329);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,330);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,331);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,332);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,333);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,334);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,335);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,336);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,337);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,338);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,339);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,340);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,341);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,342);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,343);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,344);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,345);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,346);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,347);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,348);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,349);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,350);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,351);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,352);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,353);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,354);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,355);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,356);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','DIAPHRAGM','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,357);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,358);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,359);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,360);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,361);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,362);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,363);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,364);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,365);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,366);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','LP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,367);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,368);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,369);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,370);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,371);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,372);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,373);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,374);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,375);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,376);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','ROTARY','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,377);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,378);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,379);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,380);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,381);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,382);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,383);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,384);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,385);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,386);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','LP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,387);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,388);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,389);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,390);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,391);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,392);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,393);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,394);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,395);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,396);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD INSTALL','TURBINE','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,397);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','CONT_SUM',null,1,'plus purging on time and materials basis.',null,398);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','CONT_SUM',null,2,'excluding lifting gear charges',null,399);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','CONT_SUM_QA',null,2,'excluding lifting gear charges',null,400);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','DESC_WORK',null,2,'excluding lifting gear charges',null,401);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','MP','DESC_WORK',null,2,'excluding lifting gear charges',null,402);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','DESC_WORK',null,2,'excluding lifting gear charges',null,403);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','MP','DESC_WORK',null,2,'excluding lifting gear charges',null,404);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,405);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',406);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,407);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',408);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,409);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','DIAPHRAGM','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,410);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,411);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',412);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,413);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','TERM_COND',null,4,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,414);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',415);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,416);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,417);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,418);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',419);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,420);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','TERM_COND',null,4,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,421);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',422);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,423);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,424);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,425);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,426);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,427);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,428);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,429);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','ROTARY','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,430);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','LP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,431);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD REMOVE','TURBINE','MP','CONT_SUM_QA',null,1,'excluding lifting gear charges',null,432);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','ROTARY','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,221);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,222);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,223);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,224);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,225);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,226);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,227);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,228);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,229);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,230);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','LP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,231);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,232);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,233);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,234);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,235);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,236);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,237);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,238);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,239);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,9,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,240);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('INSTALL','TURBINE','MP','TERM_COND',null,10,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,241);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','DIAPHRAGM','LP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,242);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','DIAPHRAGM','LP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,243);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','DIAPHRAGM','MP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,244);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','DIAPHRAGM','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,245);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','ROTARY','LP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,246);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','ROTARY','LP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,247);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','ROTARY','MP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,248);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','ROTARY','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,249);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','TURBINE','LP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,250);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','TURBINE','LP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,251);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','TURBINE','MP','TERM_COND',null,1,'This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.',null,252);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('OFMAT','TURBINE','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,253);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,254);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',255);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,256);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',257);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,258);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','DIAPHRAGM','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,259);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,260);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',261);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,262);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','LP','TERM_COND',null,4,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,263);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',264);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,265);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','ROTARY','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,266);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','TERM_COND',null,1,'This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.',null,267);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','TERM_COND','SELFPURGING',2,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',268);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','TERM_COND',null,3,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,269);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','LP','TERM_COND',null,4,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,270);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','MP','TERM_COND','SELFPURGING',1,'Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.','NULL',271);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','MP','TERM_COND',null,2,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,272);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('REMOVE','TURBINE','MP','TERM_COND',null,3,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,273);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,274);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,275);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,276);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,277);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,278);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,279);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,280);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,281);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,282);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,283);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,284);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,285);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,286);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,287);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,288);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,289);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,290);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,291);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,292);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,293);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','DIAPHRAGM','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,294);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,295);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,296);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,297);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,298);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,299);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,300);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,301);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,302);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,303);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,304);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','LP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,305);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,306);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,307);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,308);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.',null,309);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,310);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,311);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,312);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,313);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,314);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,10,'This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted',null,315);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','ROTARY','MP','TERM_COND',null,11,'Lifting gear if required will be charged at a rate of <20>400 per day.',null,316);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,1,'Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.',null,317);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,2,'Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.',null,318);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,3,'Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.',null,319);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,4,'The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.',null,320);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,5,'This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.',null,321);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,6,'The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily',null,322);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,7,'It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.',null,323);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,8,'The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.',null,324);
|
||
Insert into CAVEAT_TEXTS (ENTY_CODE,METY_CODE,SVCPT_CODE,DOCUMENT_POSITION,ADIT_CODE,SORT_ORDER,TEXT,CONDITION,ID) values ('STD EXCHANGE','TURBINE','LP','TERM_COND',null,9,'This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.',null,325);
|
||
|