mip/Data/BulkLoad/CAVEATS.csv

1	DOCUMENT_POSITION	ENTY_CODE	METY_CODE	SVCPT_CODE	SORT_ORDER	TEXT
2	CONT_SUM	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
3	CONT_SUM	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
4	CONT_SUM	ADVERSARIAL	ROTARY	LP	1	plus purging on time and materials basis.
5	CONT_SUM	ADVERSARIAL	ROTARY	MP	1	plus purging on time and materials basis.
6	CONT_SUM	ADVERSARIAL	TURBINE	LP	1	plus purging on time and materials basis.
7	CONT_SUM	ADVERSARIAL	TURBINE	MP	1	plus purging on time and materials basis.
8	CONT_SUM	STD REMOVE	DIAPHRAGM	LP	1	plus purging on time and materials basis.
9	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
10	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
11	CONT_SUM_QA	ADVERSARIAL	ROTARY	LP	1	plus purging on time and materials basis.
12	CONT_SUM_QA	ADVERSARIAL	ROTARY	MP	1	plus purging on time and materials basis.
13	CONT_SUM_QA	ADVERSARIAL	TURBINE	LP	1	plus purging on time and materials basis.
14	CONT_SUM_QA	ADVERSARIAL	TURBINE	MP	1	plus purging on time and materials basis.
15	CONT_SUM_QA	STD REMOVE	DIAPHRAGM	LP	1	plus purging on time and materials basis.
16	DESC_WORK	ADVERSARIAL	DIAPHRAGM	LP	1	Purging of downstream pipework.
17	DESC_WORK	ADVERSARIAL	DIAPHRAGM	MP	1	Purging of downstream pipework.
18	DESC_WORK	ADVERSARIAL	ROTARY	LP	1	Purging of downstream pipework.
19	DESC_WORK	ADVERSARIAL	ROTARY	MP	1	Purging of downstream pipework.
20	DESC_WORK	ADVERSARIAL	TURBINE	LP	1	Purging of downstream pipework.
21	DESC_WORK	ADVERSARIAL	TURBINE	MP	1	Purging of downstream pipework.
22	DESC_WORK	EXCHANGE	DIAPHRAGM	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
23	DESC_WORK	EXCHANGE	DIAPHRAGM	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
24	DESC_WORK	EXCHANGE	ROTARY	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
25	DESC_WORK	EXCHANGE	ROTARY	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
26	DESC_WORK	EXCHANGE	TURBINE	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
27	DESC_WORK	EXCHANGE	TURBINE	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
28	DESC_WORK	REMOVE	DIAPHRAGM	LP	1	Purging of downstream pipework.
29	DESC_WORK	REMOVE	DIAPHRAGM	MP	1	Purging of downstream pipework.
30	DESC_WORK	REMOVE	ROTARY	LP	1	Purging of downstream pipework.
31	DESC_WORK	REMOVE	ROTARY	MP	1	Purging of downstream pipework.
32	DESC_WORK	REMOVE	TURBINE	LP	1	Purging of downstream pipework.
33	DESC_WORK	REMOVE	TURBINE	MP	1	Purging of downstream pipework.
34	DESC_WORK	STD EXCHANGE	DIAPHRAGM	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
35	DESC_WORK	STD EXCHANGE	DIAPHRAGM	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
36	DESC_WORK	STD EXCHANGE	ROTARY	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
37	DESC_WORK	STD EXCHANGE	ROTARY	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
38	DESC_WORK	STD EXCHANGE	TURBINE	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
39	DESC_WORK	STD EXCHANGE	TURBINE	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
40	DESC_WORK	STD REMOVE	DIAPHRAGM	LP	1	Purging of downstream pipework.
41	TERM_COND	ADDON	DIAPHRAGM	LP	1	This quotation is based on there being a working LF connection on the existing meter.
42	TERM_COND	ADDON	DIAPHRAGM	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
43	TERM_COND	ADDON	DIAPHRAGM	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
44	TERM_COND	ADDON	DIAPHRAGM	MP	1	This quotation is based on there being a working LF connection on the existing meter.
45	TERM_COND	ADDON	DIAPHRAGM	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
46	TERM_COND	ADDON	DIAPHRAGM	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
47	TERM_COND	ADDON	ROTARY	LP	1	This quotation is based on there being a working LF connection on the existing meter.
48	TERM_COND	ADDON	ROTARY	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
49	TERM_COND	ADDON	ROTARY	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
50	TERM_COND	ADDON	ROTARY	MP	1	This quotation is based on there being a working LF connection on the existing meter.
51	TERM_COND	ADDON	ROTARY	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
52	TERM_COND	ADDON	ROTARY	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
53	TERM_COND	ADDON	TURBINE	LP	1	This quotation is based on there being a working LF connection on the existing meter.
54	TERM_COND	ADDON	TURBINE	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
55	TERM_COND	ADDON	TURBINE	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
56	TERM_COND	ADDON	TURBINE	MP	1	This quotation is based on there being a working LF connection on the existing meter.
57	TERM_COND	ADDON	TURBINE	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
58	TERM_COND	ADDON	TURBINE	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
59	TERM_COND	ADVERSARIAL	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
60	TERM_COND	ADVERSARIAL	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
61	TERM_COND	ADVERSARIAL	ROTARY	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
62	TERM_COND	ADVERSARIAL	ROTARY	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
63	TERM_COND	ADVERSARIAL	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
64	TERM_COND	ADVERSARIAL	TURBINE	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
65	TERM_COND	ADVERSARIAL	TURBINE	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
66	TERM_COND	EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
67	TERM_COND	EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
68	TERM_COND	EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
69	TERM_COND	EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
70	TERM_COND	EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided. The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
71	TERM_COND	EXCHANGE	DIAPHRAGM	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
72	TERM_COND	EXCHANGE	DIAPHRAGM	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
73	TERM_COND	EXCHANGE	DIAPHRAGM	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
74	TERM_COND	EXCHANGE	DIAPHRAGM	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
75	TERM_COND	EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
76	TERM_COND	EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
77	TERM_COND	EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
78	TERM_COND	EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
79	TERM_COND	EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a singlestream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
80	TERM_COND	EXCHANGE	DIAPHRAGM	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
81	TERM_COND	EXCHANGE	DIAPHRAGM	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
82	TERM_COND	EXCHANGE	DIAPHRAGM	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
83	TERM_COND	EXCHANGE	DIAPHRAGM	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
84	TERM_COND	EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
85	TERM_COND	EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
86	TERM_COND	EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
87	TERM_COND	EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
88	TERM_COND	EXCHANGE	ROTARY	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
89	TERM_COND	EXCHANGE	ROTARY	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
90	TERM_COND	EXCHANGE	ROTARY	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
91	TERM_COND	EXCHANGE	ROTARY	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
92	TERM_COND	EXCHANGE	ROTARY	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
93	TERM_COND	EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
94	TERM_COND	EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
95	TERM_COND	EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
96	TERM_COND	EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
97	TERM_COND	EXCHANGE	ROTARY	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a single stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
98	TERM_COND	EXCHANGE	ROTARY	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
99	TERM_COND	EXCHANGE	ROTARY	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
100	TERM_COND	EXCHANGE	ROTARY	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
101	TERM_COND	EXCHANGE	ROTARY	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
102	TERM_COND	EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
103	TERM_COND	EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
104	TERM_COND	EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
105	TERM_COND	EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
106	TERM_COND	EXCHANGE	TURBINE	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
107	TERM_COND	EXCHANGE	TURBINE	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
108	TERM_COND	EXCHANGE	TURBINE	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
109	TERM_COND	EXCHANGE	TURBINE	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
110	TERM_COND	EXCHANGE	TURBINE	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
111	TERM_COND	EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
112	TERM_COND	EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
113	TERM_COND	EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed
114	TERM_COND	EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
115	TERM_COND	EXCHANGE	TURBINE	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a single stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
116	TERM_COND	EXCHANGE	TURBINE	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
117	TERM_COND	EXCHANGE	TURBINE	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
118	TERM_COND	EXCHANGE	TURBINE	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
119	TERM_COND	EXCHANGE	TURBINE	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
120	TERM_COND	INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
121	TERM_COND	INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
122	TERM_COND	INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
123	TERM_COND	INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
124	TERM_COND	INSTALL	DIAPHRAGM	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
125	TERM_COND	INSTALL	DIAPHRAGM	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
126	TERM_COND	INSTALL	DIAPHRAGM	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
127	TERM_COND	INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
128	TERM_COND	INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
129	TERM_COND	INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
130	TERM_COND	INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
131	TERM_COND	INSTALL	DIAPHRAGM	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
132	TERM_COND	INSTALL	DIAPHRAGM	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
133	TERM_COND	INSTALL	DIAPHRAGM	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
134	TERM_COND	INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
135	TERM_COND	INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
136	TERM_COND	INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
137	TERM_COND	INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
138	TERM_COND	INSTALL	ROTARY	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
139	TERM_COND	INSTALL	ROTARY	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
140	TERM_COND	INSTALL	ROTARY	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
141	TERM_COND	INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
142	TERM_COND	INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
143	TERM_COND	INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
144	TERM_COND	INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
145	TERM_COND	INSTALL	ROTARY	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
146	TERM_COND	INSTALL	ROTARY	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
147	TERM_COND	INSTALL	ROTARY	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
148	TERM_COND	INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
149	TERM_COND	INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
150	TERM_COND	INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
151	TERM_COND	INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
152	TERM_COND	INSTALL	TURBINE	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
153	TERM_COND	INSTALL	TURBINE	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
154	TERM_COND	INSTALL	TURBINE	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
155	TERM_COND	INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
156	TERM_COND	INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
157	TERM_COND	INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
158	TERM_COND	INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
159	TERM_COND	INSTALL	TURBINE	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
160	TERM_COND	INSTALL	TURBINE	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
161	TERM_COND	INSTALL	TURBINE	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
162	TERM_COND	OFMAT	DIAPHRAGM	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
163	TERM_COND	OFMAT	DIAPHRAGM	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
164	TERM_COND	OFMAT	ROTARY	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
165	TERM_COND	OFMAT	ROTARY	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
166	TERM_COND	OFMAT	TURBINE	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
167	TERM_COND	OFMAT	TURBINE	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
168	TERM_COND	REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
169	TERM_COND	REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
170	TERM_COND	REMOVE	DIAPHRAGM	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
171	TERM_COND	REMOVE	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
172	TERM_COND	REMOVE	ROTARY	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
173	TERM_COND	REMOVE	ROTARY	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
174	TERM_COND	REMOVE	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
175	TERM_COND	REMOVE	TURBINE	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
176	TERM_COND	REMOVE	TURBINE	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
177	TERM_COND	REMOVE	TURBINE	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
178	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
179	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
180	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
181	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
182	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided. The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
183	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
184	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
185	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
186	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
187	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
188	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
189	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
190	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
191	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a singlestream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
192	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
193	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
194	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
195	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
196	TERM_COND	STD EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
197	TERM_COND	STD EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
198	TERM_COND	STD EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
199	TERM_COND	STD EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
200	TERM_COND	STD EXCHANGE	ROTARY	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
201	TERM_COND	STD EXCHANGE	ROTARY	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
202	TERM_COND	STD EXCHANGE	ROTARY	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
203	TERM_COND	STD EXCHANGE	ROTARY	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
204	TERM_COND	STD EXCHANGE	ROTARY	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
205	TERM_COND	STD EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
206	TERM_COND	STD EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
207	TERM_COND	STD EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
208	TERM_COND	STD EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
209	TERM_COND	STD EXCHANGE	ROTARY	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a single stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
210	TERM_COND	STD EXCHANGE	ROTARY	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
211	TERM_COND	STD EXCHANGE	ROTARY	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
212	TERM_COND	STD EXCHANGE	ROTARY	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
213	TERM_COND	STD EXCHANGE	ROTARY	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
214	TERM_COND	STD EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
215	TERM_COND	STD EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
216	TERM_COND	STD EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
217	TERM_COND	STD EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
218	TERM_COND	STD EXCHANGE	TURBINE	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
219	TERM_COND	STD EXCHANGE	TURBINE	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
220	TERM_COND	STD EXCHANGE	TURBINE	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
221	TERM_COND	STD EXCHANGE	TURBINE	LP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
222	TERM_COND	STD EXCHANGE	TURBINE	LP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
223	TERM_COND	STD EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
224	TERM_COND	STD EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
225	TERM_COND	STD EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed
226	TERM_COND	STD EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
227	TERM_COND	STD EXCHANGE	TURBINE	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a single stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
228	TERM_COND	STD EXCHANGE	TURBINE	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
229	TERM_COND	STD EXCHANGE	TURBINE	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
230	TERM_COND	STD EXCHANGE	TURBINE	MP	8	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
231	TERM_COND	STD EXCHANGE	TURBINE	MP	9	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
232	TERM_COND	STD INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
233	TERM_COND	STD INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
234	TERM_COND	STD INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
235	TERM_COND	STD INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
236	TERM_COND	STD INSTALL	DIAPHRAGM	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
237	TERM_COND	STD INSTALL	DIAPHRAGM	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
238	TERM_COND	STD INSTALL	DIAPHRAGM	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
239	TERM_COND	STD INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
240	TERM_COND	STD INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
241	TERM_COND	STD INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
242	TERM_COND	STD INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
243	TERM_COND	STD INSTALL	DIAPHRAGM	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
244	TERM_COND	STD INSTALL	DIAPHRAGM	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
245	TERM_COND	STD INSTALL	DIAPHRAGM	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
246	TERM_COND	STD INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
247	TERM_COND	STD INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
248	TERM_COND	STD INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
249	TERM_COND	STD INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
250	TERM_COND	STD INSTALL	ROTARY	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
251	TERM_COND	STD INSTALL	ROTARY	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
252	TERM_COND	STD INSTALL	ROTARY	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
253	TERM_COND	STD INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
254	TERM_COND	STD INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
255	TERM_COND	STD INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
256	TERM_COND	STD INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
257	TERM_COND	STD INSTALL	ROTARY	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
258	TERM_COND	STD INSTALL	ROTARY	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
259	TERM_COND	STD INSTALL	ROTARY	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
260	TERM_COND	STD INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
261	TERM_COND	STD INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
262	TERM_COND	STD INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
263	TERM_COND	STD INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
264	TERM_COND	STD INSTALL	TURBINE	LP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily.
265	TERM_COND	STD INSTALL	TURBINE	LP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
266	TERM_COND	STD INSTALL	TURBINE	LP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
267	TERM_COND	STD INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
268	TERM_COND	STD INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure to provide adequate housing will result in the job not being completed.
269	TERM_COND	STD INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are: L nnn mm x W nnn mm x H nnn mm . Failure not to provide accurate base will result in the job not being completed.
270	TERM_COND	STD INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of nnn (insert design minimum pressure) mbar under Qmax load at the ECV outlet point.
271	TERM_COND	STD INSTALL	TURBINE	MP	5	This quotation is based on a xxxxxx (insert inlet orientation) inlet and xxxxxx (insert outlet orientation) outlet and the ECV being installed to the dimensions provided The meter module offered is a xxxx (twin/single) stream supply with only a nominal bypass facility. The bypass is only used during maintenance, and is only sized to maintain gas pressure downstream. Please note that during maintenance it will be necessary to disrupt supplies.
272	TERM_COND	STD INSTALL	TURBINE	MP	6	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
273	TERM_COND	STD INSTALL	TURBINE	MP	7	The proposed meter module has a Qmin of nnn kWh and is based on the requested Qmax of nnn kWh.
274	TERM_COND	STD REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
275	TERM_COND	STD REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.