mip/Data/BulkLoad/CAVEATS.csv

1	DOCUMENT_POSITION	JOB TYPE	METER TYPE	SERVICE PRESSURE	SORT_ORDER	TEXT
2	CONT_SUM	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
3	CONT_SUM	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
4	CONT_SUM	ADVERSARIAL	ROTARY	LP	1	excluding lifting gear changes
5	CONT_SUM	ADVERSARIAL	ROTARY	LP	2	plus purging on time and materials basis.
6	CONT_SUM	ADVERSARIAL	ROTARY	MP	1	excluding lifting gear changes
7	CONT_SUM	ADVERSARIAL	ROTARY	MP	2	plus purging on time and materials basis.
8	CONT_SUM	ADVERSARIAL	TURBINE	LP	1	excluding lifting gear changes
9	CONT_SUM	ADVERSARIAL	TURBINE	LP	2	plus purging on time and materials basis.
10	CONT_SUM	ADVERSARIAL	TURBINE	MP	1	excluding lifting gear changes
11	CONT_SUM	ADVERSARIAL	TURBINE	MP	2	plus purging on time and materials basis.
12	CONT_SUM	STD REMOVE	DIAPHRAGM	LP	1	plus purging on time and materials basis.
13	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	LP	1	plus purging on time and materials basis.
14	CONT_SUM_QA	ADVERSARIAL	DIAPHRAGM	MP	1	plus purging on time and materials basis.
15	CONT_SUM_QA	ADVERSARIAL	ROTARY	LP	1	plus purging on time and materials basis.
16	CONT_SUM_QA	ADVERSARIAL	ROTARY	MP	1	plus purging on time and materials basis.
17	CONT_SUM_QA	ADVERSARIAL	TURBINE	LP	1	plus purging on time and materials basis.
18	CONT_SUM_QA	ADVERSARIAL	TURBINE	MP	1	plus purging on time and materials basis.
19	CONT_SUM_QA	STD REMOVE	DIAPHRAGM	LP	1	plus purging on time and materials basis.
20	DESC_WORK	ADVERSARIAL	DIAPHRAGM	LP	1	Purging of downstream pipework.
21	DESC_WORK	ADVERSARIAL	DIAPHRAGM	MP	1	Purging of downstream pipework.
22	DESC_WORK	ADVERSARIAL	ROTARY	LP	1	Purging of downstream pipework.
23	DESC_WORK	ADVERSARIAL	ROTARY	MP	1	Purging of downstream pipework.
24	DESC_WORK	ADVERSARIAL	TURBINE	LP	1	Purging of downstream pipework.
25	DESC_WORK	ADVERSARIAL	TURBINE	MP	1	Purging of downstream pipework.
26	DESC_WORK	EXCHANGE	DIAPHRAGM	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
27	DESC_WORK	EXCHANGE	DIAPHRAGM	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
28	DESC_WORK	EXCHANGE	ROTARY	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
29	DESC_WORK	EXCHANGE	ROTARY	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
30	DESC_WORK	EXCHANGE	TURBINE	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
31	DESC_WORK	EXCHANGE	TURBINE	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
32	DESC_WORK	REMOVE	DIAPHRAGM	LP	1	Purging of downstream pipework.
33	DESC_WORK	REMOVE	DIAPHRAGM	MP	1	Purging of downstream pipework.
34	DESC_WORK	REMOVE	ROTARY	LP	1	Purging of downstream pipework.
35	DESC_WORK	REMOVE	ROTARY	MP	1	Purging of downstream pipework.
36	DESC_WORK	REMOVE	TURBINE	LP	1	Purging of downstream pipework.
37	DESC_WORK	REMOVE	TURBINE	MP	1	Purging of downstream pipework.
38	DESC_WORK	STD EXCHANGE	DIAPHRAGM	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
39	DESC_WORK	STD EXCHANGE	DIAPHRAGM	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
40	DESC_WORK	STD EXCHANGE	ROTARY	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
41	DESC_WORK	STD EXCHANGE	ROTARY	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
42	DESC_WORK	STD EXCHANGE	TURBINE	LP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
43	DESC_WORK	STD EXCHANGE	TURBINE	MP	1	Any service alteration required will need to be actioned by the UIP. Any outlet pipework alterations and the outlet pipework connection to the meter module will need to be actioned by others.
44	DESC_WORK	STD REMOVE	DIAPHRAGM	LP	1	Purging of downstream pipework.
45	TERM_COND	ADDON	DIAPHRAGM	LP	1	This quotation is based on there being a working LF connection on the existing meter.
46	TERM_COND	ADDON	DIAPHRAGM	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
47	TERM_COND	ADDON	DIAPHRAGM	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
48	TERM_COND	ADDON	DIAPHRAGM	MP	1	This quotation is based on there being a working LF connection on the existing meter.
49	TERM_COND	ADDON	DIAPHRAGM	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
50	TERM_COND	ADDON	DIAPHRAGM	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
51	TERM_COND	ADDON	ROTARY	LP	1	This quotation is based on there being a working LF connection on the existing meter.
52	TERM_COND	ADDON	ROTARY	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
53	TERM_COND	ADDON	ROTARY	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
54	TERM_COND	ADDON	ROTARY	MP	1	This quotation is based on there being a working LF connection on the existing meter.
55	TERM_COND	ADDON	ROTARY	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
56	TERM_COND	ADDON	ROTARY	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
57	TERM_COND	ADDON	TURBINE	LP	1	This quotation is based on there being a working LF connection on the existing meter.
58	TERM_COND	ADDON	TURBINE	LP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
59	TERM_COND	ADDON	TURBINE	LP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
60	TERM_COND	ADDON	TURBINE	MP	1	This quotation is based on there being a working LF connection on the existing meter.
61	TERM_COND	ADDON	TURBINE	MP	2	This quotation does not include for the provision of a separate instrumentation cabinet.
62	TERM_COND	ADDON	TURBINE	MP	3	Electrical Connections to gas meters are subject to the assessment of the hazardous area around the meter. This is largely affected by the ventilation in the housing. Should the ventilation be found to be inadequate the connection will not be made and the requirements to allow the connection reported to you.
63	TERM_COND	ADVERSARIAL	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
64	TERM_COND	ADVERSARIAL	DIAPHRAGM	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
65	TERM_COND	ADVERSARIAL	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
66	TERM_COND	ADVERSARIAL	ROTARY	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
67	TERM_COND	ADVERSARIAL	ROTARY	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
68	TERM_COND	ADVERSARIAL	ROTARY	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
69	TERM_COND	ADVERSARIAL	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
70	TERM_COND	ADVERSARIAL	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
71	TERM_COND	ADVERSARIAL	TURBINE	LP	2	Lifting gear if required will be charged at a rate of £400 per day.
72	TERM_COND	ADVERSARIAL	TURBINE	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
73	TERM_COND	ADVERSARIAL	TURBINE	MP	1	Lifting gear if required will be charged at a rate of £400 per day.
74	TERM_COND	ADVERSARIAL	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
75	TERM_COND	EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
76	TERM_COND	EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
77	TERM_COND	EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
78	TERM_COND	EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
79	TERM_COND	EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
80	TERM_COND	EXCHANGE	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
81	TERM_COND	EXCHANGE	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
82	TERM_COND	EXCHANGE	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
83	TERM_COND	EXCHANGE	DIAPHRAGM	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
84	TERM_COND	EXCHANGE	DIAPHRAGM	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
85	TERM_COND	EXCHANGE	DIAPHRAGM	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
86	TERM_COND	EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
87	TERM_COND	EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
88	TERM_COND	EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
89	TERM_COND	EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
90	TERM_COND	EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
91	TERM_COND	EXCHANGE	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
92	TERM_COND	EXCHANGE	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
93	TERM_COND	EXCHANGE	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
94	TERM_COND	EXCHANGE	DIAPHRAGM	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
95	TERM_COND	EXCHANGE	DIAPHRAGM	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
96	TERM_COND	EXCHANGE	DIAPHRAGM	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
97	TERM_COND	EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
98	TERM_COND	EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
99	TERM_COND	EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
100	TERM_COND	EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
101	TERM_COND	EXCHANGE	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
102	TERM_COND	EXCHANGE	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
103	TERM_COND	EXCHANGE	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
104	TERM_COND	EXCHANGE	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
105	TERM_COND	EXCHANGE	ROTARY	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
106	TERM_COND	EXCHANGE	ROTARY	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
107	TERM_COND	EXCHANGE	ROTARY	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
108	TERM_COND	EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
109	TERM_COND	EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
110	TERM_COND	EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
111	TERM_COND	EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
112	TERM_COND	EXCHANGE	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
113	TERM_COND	EXCHANGE	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
114	TERM_COND	EXCHANGE	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
115	TERM_COND	EXCHANGE	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
116	TERM_COND	EXCHANGE	ROTARY	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
117	TERM_COND	EXCHANGE	ROTARY	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
118	TERM_COND	EXCHANGE	ROTARY	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
119	TERM_COND	EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
120	TERM_COND	EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed..
121	TERM_COND	EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
122	TERM_COND	EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
123	TERM_COND	EXCHANGE	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
124	TERM_COND	EXCHANGE	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
125	TERM_COND	EXCHANGE	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
126	TERM_COND	EXCHANGE	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
127	TERM_COND	EXCHANGE	TURBINE	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
128	TERM_COND	EXCHANGE	TURBINE	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
129	TERM_COND	EXCHANGE	TURBINE	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
130	TERM_COND	EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
131	TERM_COND	EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
132	TERM_COND	EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
133	TERM_COND	EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
134	TERM_COND	EXCHANGE	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
135	TERM_COND	EXCHANGE	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
136	TERM_COND	EXCHANGE	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
137	TERM_COND	EXCHANGE	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
138	TERM_COND	EXCHANGE	TURBINE	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
139	TERM_COND	EXCHANGE	TURBINE	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
140	TERM_COND	EXCHANGE	TURBINE	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
141	TERM_COND	INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
142	TERM_COND	INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
143	TERM_COND	INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
144	TERM_COND	INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
145	TERM_COND	INSTALL	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
146	TERM_COND	INSTALL	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
147	TERM_COND	INSTALL	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
148	TERM_COND	INSTALL	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
149	TERM_COND	INSTALL	DIAPHRAGM	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
150	TERM_COND	INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
151	TERM_COND	INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
152	TERM_COND	INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
153	TERM_COND	INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
154	TERM_COND	INSTALL	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
155	TERM_COND	INSTALL	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
156	TERM_COND	INSTALL	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
157	TERM_COND	INSTALL	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
158	TERM_COND	INSTALL	DIAPHRAGM	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
159	TERM_COND	INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
160	TERM_COND	INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
161	TERM_COND	INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
162	TERM_COND	INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
163	TERM_COND	INSTALL	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
164	TERM_COND	INSTALL	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
165	TERM_COND	INSTALL	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
166	TERM_COND	INSTALL	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
167	TERM_COND	INSTALL	ROTARY	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
168	TERM_COND	INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
169	TERM_COND	INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
170	TERM_COND	INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
171	TERM_COND	INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
172	TERM_COND	INSTALL	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
173	TERM_COND	INSTALL	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
174	TERM_COND	INSTALL	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
175	TERM_COND	INSTALL	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
176	TERM_COND	INSTALL	ROTARY	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
177	TERM_COND	INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
178	TERM_COND	INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
179	TERM_COND	INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
180	TERM_COND	INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
181	TERM_COND	INSTALL	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
182	TERM_COND	INSTALL	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
183	TERM_COND	INSTALL	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
184	TERM_COND	INSTALL	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
185	TERM_COND	INSTALL	TURBINE	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
186	TERM_COND	INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
187	TERM_COND	INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
188	TERM_COND	INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
189	TERM_COND	INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
190	TERM_COND	INSTALL	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
191	TERM_COND	INSTALL	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
192	TERM_COND	INSTALL	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
193	TERM_COND	INSTALL	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
194	TERM_COND	INSTALL	TURBINE	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
195	TERM_COND	OFMAT	DIAPHRAGM	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
196	TERM_COND	OFMAT	DIAPHRAGM	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
197	TERM_COND	OFMAT	DIAPHRAGM	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
198	TERM_COND	OFMAT	DIAPHRAGM	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
199	TERM_COND	OFMAT	ROTARY	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
200	TERM_COND	OFMAT	ROTARY	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
201	TERM_COND	OFMAT	ROTARY	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
202	TERM_COND	OFMAT	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
203	TERM_COND	OFMAT	TURBINE	LP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
204	TERM_COND	OFMAT	TURBINE	LP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
205	TERM_COND	OFMAT	TURBINE	MP	1	This charge will only be applicable if the meter accuracy test identifies the meter to be working correctly.
206	TERM_COND	OFMAT	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
207	TERM_COND	REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
208	TERM_COND	REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
209	TERM_COND	REMOVE	DIAPHRAGM	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
210	TERM_COND	REMOVE	DIAPHRAGM	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
211	TERM_COND	REMOVE	DIAPHRAGM	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
212	TERM_COND	REMOVE	ROTARY	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
213	TERM_COND	REMOVE	ROTARY	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
214	TERM_COND	REMOVE	ROTARY	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
215	TERM_COND	REMOVE	ROTARY	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
216	TERM_COND	REMOVE	ROTARY	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
217	TERM_COND	REMOVE	TURBINE	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
218	TERM_COND	REMOVE	TURBINE	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
219	TERM_COND	REMOVE	TURBINE	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
220	TERM_COND	REMOVE	TURBINE	MP	1	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
221	TERM_COND	REMOVE	TURBINE	MP	2	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
222	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
223	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
224	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
225	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
226	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
227	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
228	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
229	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
230	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
231	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
232	TERM_COND	STD EXCHANGE	DIAPHRAGM	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
233	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
234	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
235	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
236	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
237	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
238	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
239	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
240	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
241	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
242	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
243	TERM_COND	STD EXCHANGE	DIAPHRAGM	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
244	TERM_COND	STD EXCHANGE	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
245	TERM_COND	STD EXCHANGE	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
246	TERM_COND	STD EXCHANGE	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
247	TERM_COND	STD EXCHANGE	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
248	TERM_COND	STD EXCHANGE	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
249	TERM_COND	STD EXCHANGE	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
250	TERM_COND	STD EXCHANGE	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
251	TERM_COND	STD EXCHANGE	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
252	TERM_COND	STD EXCHANGE	ROTARY	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
253	TERM_COND	STD EXCHANGE	ROTARY	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
254	TERM_COND	STD EXCHANGE	ROTARY	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
255	TERM_COND	STD EXCHANGE	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
256	TERM_COND	STD EXCHANGE	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
257	TERM_COND	STD EXCHANGE	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
258	TERM_COND	STD EXCHANGE	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
259	TERM_COND	STD EXCHANGE	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
260	TERM_COND	STD EXCHANGE	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
261	TERM_COND	STD EXCHANGE	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
262	TERM_COND	STD EXCHANGE	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
263	TERM_COND	STD EXCHANGE	ROTARY	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
264	TERM_COND	STD EXCHANGE	ROTARY	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
265	TERM_COND	STD EXCHANGE	ROTARY	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
266	TERM_COND	STD EXCHANGE	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
267	TERM_COND	STD EXCHANGE	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
268	TERM_COND	STD EXCHANGE	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
269	TERM_COND	STD EXCHANGE	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
270	TERM_COND	STD EXCHANGE	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
271	TERM_COND	STD EXCHANGE	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
272	TERM_COND	STD EXCHANGE	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
273	TERM_COND	STD EXCHANGE	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
274	TERM_COND	STD EXCHANGE	TURBINE	LP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
275	TERM_COND	STD EXCHANGE	TURBINE	LP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
276	TERM_COND	STD EXCHANGE	TURBINE	LP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
277	TERM_COND	STD EXCHANGE	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
278	TERM_COND	STD EXCHANGE	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
279	TERM_COND	STD EXCHANGE	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
280	TERM_COND	STD EXCHANGE	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
281	TERM_COND	STD EXCHANGE	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
282	TERM_COND	STD EXCHANGE	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
283	TERM_COND	STD EXCHANGE	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
284	TERM_COND	STD EXCHANGE	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
285	TERM_COND	STD EXCHANGE	TURBINE	MP	9	This quotation is based on the exchange being completed on the same day and the new meter module being attached to the existing ECV.
286	TERM_COND	STD EXCHANGE	TURBINE	MP	10	Please note that this quotation is based on two visits, first visit for the removal and purging of the existing meter module and the second to install a new meter module after the service alteration.
287	TERM_COND	STD EXCHANGE	TURBINE	MP	11	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
288	TERM_COND	STD INSTALL	DIAPHRAGM	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
289	TERM_COND	STD INSTALL	DIAPHRAGM	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
290	TERM_COND	STD INSTALL	DIAPHRAGM	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
291	TERM_COND	STD INSTALL	DIAPHRAGM	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
292	TERM_COND	STD INSTALL	DIAPHRAGM	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
293	TERM_COND	STD INSTALL	DIAPHRAGM	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
294	TERM_COND	STD INSTALL	DIAPHRAGM	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
295	TERM_COND	STD INSTALL	DIAPHRAGM	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
296	TERM_COND	STD INSTALL	DIAPHRAGM	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
297	TERM_COND	STD INSTALL	DIAPHRAGM	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
298	TERM_COND	STD INSTALL	DIAPHRAGM	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
299	TERM_COND	STD INSTALL	DIAPHRAGM	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
300	TERM_COND	STD INSTALL	DIAPHRAGM	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
301	TERM_COND	STD INSTALL	DIAPHRAGM	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
302	TERM_COND	STD INSTALL	DIAPHRAGM	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
303	TERM_COND	STD INSTALL	DIAPHRAGM	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
304	TERM_COND	STD INSTALL	DIAPHRAGM	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
305	TERM_COND	STD INSTALL	DIAPHRAGM	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
306	TERM_COND	STD INSTALL	ROTARY	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
307	TERM_COND	STD INSTALL	ROTARY	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
308	TERM_COND	STD INSTALL	ROTARY	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
309	TERM_COND	STD INSTALL	ROTARY	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
310	TERM_COND	STD INSTALL	ROTARY	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
311	TERM_COND	STD INSTALL	ROTARY	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
312	TERM_COND	STD INSTALL	ROTARY	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
313	TERM_COND	STD INSTALL	ROTARY	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
314	TERM_COND	STD INSTALL	ROTARY	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
315	TERM_COND	STD INSTALL	ROTARY	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
316	TERM_COND	STD INSTALL	ROTARY	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
317	TERM_COND	STD INSTALL	ROTARY	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
318	TERM_COND	STD INSTALL	ROTARY	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
319	TERM_COND	STD INSTALL	ROTARY	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
320	TERM_COND	STD INSTALL	ROTARY	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
321	TERM_COND	STD INSTALL	ROTARY	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
322	TERM_COND	STD INSTALL	ROTARY	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
323	TERM_COND	STD INSTALL	ROTARY	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
324	TERM_COND	STD INSTALL	TURBINE	LP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
325	TERM_COND	STD INSTALL	TURBINE	LP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
326	TERM_COND	STD INSTALL	TURBINE	LP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
327	TERM_COND	STD INSTALL	TURBINE	LP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure of 25 mbar under Qmax load at the ECV outlet point.
328	TERM_COND	STD INSTALL	TURBINE	LP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
329	TERM_COND	STD INSTALL	TURBINE	LP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
330	TERM_COND	STD INSTALL	TURBINE	LP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
331	TERM_COND	STD INSTALL	TURBINE	LP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
332	TERM_COND	STD INSTALL	TURBINE	LP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
333	TERM_COND	STD INSTALL	TURBINE	MP	1	Please note that all the sizes and dimensions stated are indicative and are based on current practice at the time of quotation. These are subject to change and must be confirmed at placement of order.
334	TERM_COND	STD INSTALL	TURBINE	MP	2	Housings must have a free ventilation area equal to/exceeding 3% floor area. Minimum Housing requirements for this module are listed in the Meter Housing Detail section above. Failure to provide adequate housing will result in the job not being completed.
335	TERM_COND	STD INSTALL	TURBINE	MP	3	Minimum Base dimension requirements for this module are listed in the Meter Housing and Base section above. Failure not to provide an accurate base will result in the job not being completed.
336	TERM_COND	STD INSTALL	TURBINE	MP	4	The Supply Point must be suitably sized and positioned to provide a minimum pressure as described in table 1 (ECV Outlet) under Qmax load at the ECV outlet point.
337	TERM_COND	STD INSTALL	TURBINE	MP	5	This quotation is based on a the inlet orientation and outlet orientation described in table 3 and the ECV being installed to the dimensions provided.
338	TERM_COND	STD INSTALL	TURBINE	MP	6	The meter module is a single stream supply with no bypass facility. During maintenance operations on the meter installation it may be necessary to isolate the supply temporarily
339	TERM_COND	STD INSTALL	TURBINE	MP	7	It is critical that the module inlet dimensions and orientation are given to the UIP when service works are taken place.
340	TERM_COND	STD INSTALL	TURBINE	MP	8	The proposed meter module has a Qmin specified in table 2 and is based on the requested Qmax also specified in table 2.
341	TERM_COND	STD INSTALL	TURBINE	MP	9	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted
342	TERM_COND	STD REMOVE	DIAPHRAGM	LP	1	This quotation is based on a low pressure service tier. If the pressure tier if found not to be low pressure, this will be subject to a new quotation or variation and planned meter works will not commence.
343	TERM_COND	STD REMOVE	DIAPHRAGM	LP	2	Where purging of downstream supplies is necessary but has not been requested as part of the meter removal work, the meter will not be removed until the downstream supplies have been made safe by purging.
344	TERM_COND	STD REMOVE	DIAPHRAGM	LP	3	This quotation is subject to there being sufficient access available and free from any obstructions. Failure to provide sufficient access may result in the job being aborted